Advertisement
12
Replace the leveler to the other side and
adjust it to make sure the cabinet level.
Attachment：
1. Components that could be transferred from
one side to the other directly after disassembling
are listed below:
top door top endcap coverslip (2pcs)
top cover buckle (1pc)
hinge shaft sleeve (1 or 2pcs)
screws of top hinge (3 pcs)
middle hinge assembly (1 pc)
screws of middle hinge (2 pcs)
insert nail (2 pcs)
screw cap (2 pcs)
door stopper (1 pc)
bottom hinge assembly (1 pc)
screws of lower hinge (3pcs)
2. The component that could be swapped over
from one side to the other only after reconstruction
are listed below.
top hinge assembly
3. Components that could be swapped over from
one side to the other in pairs are listed below:
adjustable foot with internal thread (used with
the lower hinge)
adjustable foot with bolt (fixed at the bottom)
4. Components that could not be reused
temporarily are listed below:
left block on top door
right block on top door
Ensure the Appliance is unplugged and empty
Adjust the two leveling feet to their highest position
We recommend you have someone to assist you
Advertisement
