Advertisement
Audio/Video INPUT SELECTOR switches
VCR 1: Press when performing playback on a VCR unit.
VCR 2: Press when performing playback on a second VCR unit.
VDP/CDV: Press when performing playback on a video disc player (VDP)
or CDV player.
TUNER: Press when listening to radio broadcasts.
TAPE 1/DAT: Press when performing playback on a DAT or cassette
deck.
TAPE 2 MONITOR:
Press when performing playback on a second
cassette deck or second DAT and when monitoring recording.
CD: Press when playing compact discs on a CD player.
PHONO: Press when playing records on turntable.
SURROUND mode selector switches
OFF:
To cancel the surround function.
STUDIO:
Select this setting to enjoy the effect of listening to music recording
studio.
SIMULATED SURROUND:
Select this setting when listening to music or a monaural source, etc.
With a monaural source, a much better surround effect is achieved if
it is used together with SIMULATED
STEREO.
DOLBY SURROUND
Select this setting when watching video tapes or video discs bearing
the Q0| DOLBY SURROUND | mark.
@1) DELAY TIME switch
Operates when the SIMULATED or DOLBY SURROUND mode is ON.
Switches to surround delay time in three steps. For DOLBY SURROUND,
20 ms is standard.
ft
ms ->20 ms -» 30 ms |
@2 BASS control switches
Use to adjust the low-frequency level. Press the + switch to increase
low-frequency level, and the — switch to decrease it.
The TONE indicator appears on the display section.
When
both
switches
(+,
—) of the BASS
control
are pressed
simultaneously,
the bass response
will be set to the flat (normal)
condition.
DISPLAY SECTION
BALANCE
Cocke
me aN
VN VN VN VM ne Oo
WAT
TA TT
CaoTnes
7
vo
I
OO @®
®
@
© VIDEO SIGNAL + | MANUAL
\Vi-> @r-t-{e]e\-eer-t-lele)
@) TREBLE control switches
Use to adjust the high-frequency level. Press the + switch to increase
high-frequency level, and the — switch to decrease it.
The TONE indicator appears on the display section.
When
both switches
(+,
—) of the TREBLE
contro! are pressed
simultaneously, the treble response will be set to the flat (normal)
condition.
ACOUSTIC switches
MEMORY:
Pressing this switch will result in the memorization of the sound quality
(tone control condition). Press again to cancel this mode.
SELECT:
* This switch is used to preset the five acoustic memories (A—E).
¢ This switch is also used to recall previously set sound quality settings.
Each time you press the switch, the sound quality setting advances
in the order shown below.
aban
escola A&B
CDE
coral
FLAT: For flat (normal) frequency response.
LOUDNESS: Emphasizes the low- and high- frequency ranges. Produces
a fuller sense of sound, particularly when listening at low volume.
A—E: Memorized acoustic memory settings.
@@® ©
©
IH
=
el) Z 4H CT im e
[rc hi FM MON'
EM
IE |_| 7 | [| | | MHz
TUNING
SLEEP
[ STuDIO___]
OELAY
AUTO
O
CSiMmuLATED]
may
Paarl
Ooessrseeass) ||
[a0]
*SURROUND MODE:
tr
OOM
@
@
® @
45
Advertisement
