Related Manuals for DABBSSON DBS2300Plus
Summary of Contents for DABBSSON DBS2300Plus
- Page 1 Dabbsson DBS2300Plus User Manual LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET...
- Page 2 Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://www.dabbsson.com and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area.
-
Page 3: Table Of Contents
2. Safety Instructions 2.1 Usage 2.2 Disposal Guide 3. Product Details 3.1 Over View 3.2 LCD Screen 4. General Product Usage 4.1 Charging DBS2300Plus AC Charging Car Charging Solar Charging Using Smart Extra Battery 4.2 Control the product Power On/Off 4.3 Charging Your Devices... -
Page 4: Specifications
1. Specifications General Info Net Weight Approximately 26.2kg (57.8lbs) Dimensions 432x254.5x303.5mm (17x10x12in) Capacity 2330Wh (44.8V 52Ah) Wi-Fi Supports 2.4G: 2412-2472MHz with a maximum of 14.9 dBm Supports BDR+EDR: 2402-2480MHz with a maximum of 2.5 dBm Certification ETL FCC PSE WEEE ROHS TELEC Output Ports AC (x4) Pure Sine Wave, 2200W total (surge 4400W),... -
Page 5: Safety Instructions
5. Avoid using wires or other metal objects that may result in a short circuit. 6. Do not use unofficial components or accessories. If you need to replace any components or accessories, visit official Dabbsson channels to check for relevant information. -
Page 6: Disposal Guide
7. It is highly recommended that third-party accessories are purchased from reliable distributors and that they match your product’s specifications. Dabbsson is not liable for abnormality, inconvenience, losses or expenses resulting from defective third-party accessories. 8. When using the product, please strictly follow the operating environment temperature specified in this user manual. -
Page 7: Product Details
3. Product Details 3.1 Over View LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET LCD Screen LIGHT ON/OFF USB-A Fast Charge Output Port USB-A Output Port（x2） USB ON/OFF USB-C 100W Output Port Main Power Button Car Output Port Anderson Port（12V/30A) -
Page 8: Lcd Screen
3.2 LCD Screen Error Code High Temperature Warning Low Temperature Warning e Connection Failed Overload Warning AC Output AC Output Frequency DC Output USB-A Output USB-C Output Extra Battery Indicator Solar Panel Indicator Remaining Charge/Discharge Time Input Power Battery Level Indicator Wi-Fi Status Remaining Battery Percentage Fan Indicator... -
Page 9: General Product Usage
Dabbsson fast charge technology is specifically for AC charging, offering 1800W of max input power. You can control the charging power through the AC Charge Speed Switch. The default max input power for the AC charging speed is 600W, which can be modified in the Dabbsson app. - Page 10 15A.Otherwise, reduce the unit charging speed with the AC Charge Speed Switch. Dabbsson takes no responsibilities for any consequences caused by failures to follow instructions, including but not limited to charging with other AC charging cables.
- Page 11 Connect XT60 Port Connection with Solar Panel LIGHT ON/OFF MC4 Connection DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET 200W Solar Panel Connection with Solar Panel Connect XT60 Port LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W...
- Page 12 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET 200W Solar Panel (x4) When charging the product with a Dabbsson solar panel, follow the instructions of this user manual to avoid damage to the product.
- Page 13 Please refer to Dabbsson support youtube channel for detailed installation instructions. Precautions 1. Turn off both the Extra Battery DBS3000B and DBS2300Plus before plug or unplug the extra battery. 2. Before using, make sure both DBS2300Plus and Extra Battery DBS3000B display the extra battery icon on their LCD screens.
- Page 14 4. When the DBS2300Plus power station and DBS3000B expandable battery are not in use, please remove the connecting cable. 5. To protect the battery from over-discharging，please unplug the cable when the unit is fully charged or not in use. 6. When the device is running, inserting or unplugging the parallel cable will turn off the output of the host.
- Page 15 LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET...
-
Page 16: Control The Product
Main Power Button. The default standby time is 2 hours. The device will automatically shut down when other power buttons are turned off and no other power source is detected within 2 hours. Standby time of AC and DC can be set via the Dabbsson APP. STANDBY MODE/ECO MODE Default ECO MODE will be on. -
Page 17: Charging Your Devices
1. The P-Boost function is not available when the product turns on the AC output while in the charging state, parallel state or when the P-Boost mode is turned off in the Dabbsson APP. 2. P-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict voltage requirements and a rated power over 2200W. -
Page 18: Parallel Connection Function
4660Wh. At the same time, this product also supports parallel operation, two products are respectively connected to two DBS3000B and powered on (2*DBS2300Plus+4*DBS3000B), at this time the battery can be expanded to 16660Wh. You can use this product as a home backup power station in case of a power outage. - Page 19 LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET LIGHT ON/OFF DEVICE 5V 2.4A FAST CHARGE PD 100W PD 30W USB ON/OFF 12V ON/OFF IOT RESET LIGHT ON/OFF LIGHT ON/OFF DEVICE DEVICE 5V 2.4A FAST CHARGE PD 100W...
-
Page 20: App Control
Connecting the APP to the product Method 1: Bluetooth Connection Mode Connect the mobile phone to home 2.4G Wi-Fi network, open the DABBSSON APP, select “+Add Device” or the “+” symbol on the upper right corner of the home page. - Page 21 Tap to open BT authorization dialog box and select allow to turn on BT Service. Allow New Connections. Wait for the unit to search nearby device. After the device is found, select Add.
- Page 22 Enter home Wi-Fi name and passwords and Add the power station and wait for it to select Next. connect. If the adding failed and shows following Select COMPLETE after the device is add interface, please select reconnect until the successfully. complete interface appears.
- Page 23 After complete adding the device, select a UI style and select “Set to current style” and enter the APP control interface. Method 2: Wi-Fi Connection Mode Connect the mobile phone to home 2.4G Wi-Fi network, open the DABBSSON APP, select “+Add Device” or the “+” symbol on the upper right corner of the home page.
- Page 24 Select device model. Long press the “IOT RESET” button on the device until you hear a “beep” and let go. Then select next. Enter home Wi-Fi name and passwords and select Next.
- Page 25 Tap go to connect and enter the phone’s Wi-Fi setting. Select the Power station hotspot and connect to that hotspot. Go back to the APP interface, confirm the connection and wait for the device to connect.
- Page 26 After the device is added successfully, If the adding failed and shows following interface, please select reconnect until the select “Start using”. complete interface appears. After complete adding the device, select a UI style and select “Set to current style” and enter the APP control interface.
- Page 27 Power station firmware update Tap the device you want to upgrade, enter the device interface, tap the icon in the upper right corner to enter the setting page, find and click the firmware update option, enter the device update page, click "Update"...
- Page 28 If the power station’s firmware update failed, please try again. Privacy Policy By using Dabbsson Products, Applications and Services, you consent to the Dabbsson Term of Use and Privacy Policy, which you can access via the "support" section on the Dabbsson App or on the official Dabbsson...
-
Page 29: Faqs
6. FAQS 1. What type of batteries does the product use? This product uses high-quality LiFePO4 battery. 2. What devices can use the product’s AC output port power? With 2200W rated power and 4400W peak power, the product’s AC output port can power most household appliances. -
Page 30: Troubleshooting
The product will automatically resume DC Output (Flashing) normal operation after you remove the Overload Protection device connected to the DC outlet. DC Output High The product will automatically resume (Flashing) Temperature Protection normal operation after it cools down. Others Contact Dabbsson Customer Service... -
Page 31: What's In The Box
45℃ (113℉) or below -10℃ (14℉) for an extended period. 2. Storing a battery with a low charge for a long period shortens its lifespan. DBS2300Plus mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is at about 60% before putting DBS2300Plus into long-term storage. -
Page 32: Fcc Statement
10. Fcc Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: （1）This device may not cause harmful interference. （2）This device must accept any interference received, including interference that may cause undesired operation.