True SPL0400 Owner's Manual page 21

STEP 3—ATTACH SEAT AND GAS SHOCK CONTINUED
d. Using an allen wrench, attach the gas shock to the
main frame using the 1 hex screw, 1 lock washer,
and 1 fl at washer you removed previously.
NOTE: One person should hold the back seat frame
while the other attaches the gas shock.
3
8
e. Using an allen wrench, attach the seat back frame
to the main frame using the 2 hex screws, 2 lock
washers, 2 bolt caps, and 1 axle you removed
previously.
NOTE: Use a rubber mallet to fully insert the axle into
the main frame.
7
10
4
5
7
2
9
1
f. Using an allen wrench, reattach the 2 hex screws
and 2 stops you removed previously from the seat
back frame.
6
2
11
21