Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A User Manual page 8

2496.1 16x24 en 14-12-2005
CABLE
CABLE / ANTENNA
4
10:11 Pagina 4
é
Basic connections to the TV
Your integrated digital TV automatically decodes and displays the four
basic DTV picture resolution standards.
- SDTV (Standard Definition TV) are broadcast as 480i (480-line
interlaced) or 480p (480-line progressive scan) video.
- HDTV (High-Definition TV) are broadcast either in the 1080i or 720p
formats, always with a widescreen picture.
Note: Progressive scan video (p) is more like that you see in a movie theater.
Images are much more distinct and free of flicker, and motion is smoother.
Next to analog NTSC broadcast reception, your TV has an integrated
High Definition TV tuner which receives, decodes and displays
terrestrial ATSC and unscrambled cable (QAM) signals.
HDTV quality is only reproduced when a broadcaster or cable provider
broadcasts HDTV signals.
Note: Ask your broadcaster or cable box provider to transmit/enable HD
content to your home, and possibly upgrade to a CableCard for the description
of HD signals.
Note: This drawing is used wherever you can connect cable or antenna.
- Cable TV
Connect the cable TV signal to the
at the bottom of the TV. See page 10 for details on using Autoprogram
to store channels in the TV's memory.
Note: this connection will supply stereo sound to the TV if it is being
75
broadcast by the station you are watching.
- Cable box with
CABLE
• Connect the incoming cable TV signal to the cable
back of the cable box.
• Connect a coaxial cable (not supplied) from the
back of the cable box to the
at the bottom of the TV.
Note:Your cable box may have a different label for the
as
OUTPUT
• Set the
OUTPUT CH
(whichever is correct for your cable box), then tune the TV to the
corresponding channel.
Once tuned, change channels at the cable box, not the TV.
Note: This connection will not supply stereo sound to the TV. The reason is
that the RF output on a cable box - labeled
example - will not send a stereo signal to the tuner (VHF/UHF) input on a
TV.
CABLE/ANTENNA 75 Ω
RF IN/OUT
HDMI 1 HDMI 2
CABLE / ANTENNA
TO TV
2
OUTPUT
IN OUT
3
STB
CABLE/ANTENNA 75 Ω
or .
OUT
switch 3 of the cable box to
x jack
75
jack 1 on the
IN
jack on the
TO TV
x jack 2
jack, such
TO TV
or
CH 3 4
, or for
TO TV OUT OUTPUT