Advertisement
System connections
Connection A |
■ Using the KM-996 as the amplifier for the second sets of speakers of
KA-996
Make connections as shown below. When connecting the related system components, refer also to the Instruction
manuals of the related components.
Do not plug in the power lead until all connections are completed.
• This connection is not available with the KM-896.
H Spf,'d'-'Cl SySt':
KM-996
A spei-iker systcr
Set the speaker mode switch on the front panel to
STEREO (SPEAKER B)".
If the speakers shown in "Connection B" are also
connected, either set of speakers can be used by
simply switching the speaker mode switch. {KM-996
only)
Speaker cord connection
1
Push the
2
Insertthe
3 Lock the
lever.
cord.
lever.
s
.
!
c.A^ ;
Notes;
1. Cor'nect all cords firmly. If connections are loose, there could be loss sound or noise produce-
2, When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet.
Plugging/
unplugging connection cords without removal of the power cord can cause malfunctions or darmage to the unit.
4
KM-89G/KM-996iFn}
Advertisement
