Installation Steps - Beko EBA 6000 W User Manual

3 Use

3.1 Installation steps

1. Remove the air inlet grille.
2. Take out the pre-filter Press the raised part on
both sides to pull it outwards, and take out the
pre-filter.
3. Remove the protective film of the filter.
4. Install the HEPA filter.
Bladeless Air Fan & Purifier / User Manual
5. Install the pre-filter Align the slot position at the bot-
tom, and buckle up the upper U-shaped buckle.
6. Install the air inlet grille Align the upper two
buckles and press them tightly, then press the
two sides at lower part, slowly and gently buckle
the air inlet grille.
7. Install the adapter,Tighten the plug with the soc-
ket position of the base
8. Plug power supply.
Centering
11 / EN