Assembly Preparation - Cuisinart CPT-194 Manual

ASSEMBLY PREPARATION

Please be careful when handling components. Always wear work gloves during assembly and set up. Read
and follow all safety statements, warnings, assembly instructions and use and care instructions before
attempting to assemble and use. Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If any part is missing or damaged, DO
NOT attempt to assemble the product.
Estimated Assembly Time: 1 hour
Tools required for assembly: (included) Wrench, (not included) Phillips Head Screwdriver (magnetic tip will be
helpful), Gloves
Included
ASSEMBLY INSTRUCTIONS
Assembly Tip: To avoid scratching prep table and to protect floor/patio surfaces, reuse cardboard packaging
and lay parts on top while assembling.
STEP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To create "screw assemblies" for future steps, install all 40 of the lock washers (BB) onto all 40 screws (AA).
AA
Install locking casters (16) and non locking casters (8) on opposing ends as shown. Use the double-ended
open wrench (BB) to attach the 4 casters (16, 8) onto the bottom of each leg.
Screw Assembly
BB
Not Included
5