Ikelite 6973.10 Instruction Manual page 23

•
Adjust lighting power.
Photos are under-exposed (too dark)
•
Adjust aperture (larger), shutter speed (slower), or ISO (higher)
setting.
•
Move light(s) closer to your subject and make sure they are pointed
in the right direction.
•
Adjust exposure compensation in the camera.
•
Adjust lighting power.
Strobe(s) will not fire
•
Turn on strobe.
•
Check the strobe(s) battery life.
•
Restore the camera to factory default settings. There are some
camera settings that will prevent an external flash from firing.
•
Check camera settings recommended for use with an external
strobe in the beginning of this manual.
•
Check that the fiber optic cord is properly attached.
Button(s) are sticking
•
Soak the housing in lukewarm fresh water. Depress each button
several times while the housing is submerged. Rinse the housing
with running fresh water.
•
Lubricate the controls.
Button(s) or control(s) not operating
•
Tighten the camera mounting plate with a screwdriver.
•
Ensure that nothing is preventing the camera from going all of the
way into the housing.
23