Onboard Headers And Connectors - ASROCK N3160-NUC IPC User Manual

2.5 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Clear CMOS Pad
(CLRMOS1)
(see p.8, No. 1)
SATA Power Output Connector
(SATA_PWR1)
(see p.8, No. 3)
SATA3 Connector
(SATA3_1: see p.8, No. 4)
LPC Debug Header
(13-pin LPC1)
(
see p.8, No. 5)
1
GND
+3V
PIN Signal Name PIN Signal Name
14 +3V 13
12 +3V 11
10 GND 9
8 LAD3 7
6 LAD1 5
4 LFRAME# 3
2 GND 1
Please connect a SATA
power cable to this connector.
+5V
This Serial ATA3 (SATA3)
connector supports SATA data
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
This connector supports a
Trusted Platform Module (TPM)
system, which can
securely store keys, digital
NC
certificates, passwords, and
+3V
data. A TPM system also helps
GND
enhance network security,
LAD2
protects digital identities, and
LAD0
RESET#
ensures platform integrity.
CLK
13