Pioneer PD-M610 Operating Instructions Manual page 18

OPERATION
TO PLAYBACK TRACKS IN A DESIRED ORDER
(PROGRAMMED PLAYBACK)
@ With this function, you can play back the tracks on the discs in
the magazine in any order desired.
® By specifying disc numbers from 1 to 6, and track numbers
from 7 to 99, you can select up to 32 steps for playback in any
order you like.
Memorizing a program
1. During stop mode, press the PGM key 1)
° The player will enter the program mode. Pressing the PGM
key {7 again will cancel the program mode.
Each time you program a step, the indicator will display the
program step and the programmed disc number and track
number.
The figure below shows the display when track 5 on disc 2 is
programmed as step 1.
The PROGRAM indicator lights.
weveuiii iii iii iii ii Mii iti it
~meo rt
pad OS
..P-@!
cc" S, |
i
Program step is displayed.
® If tracks are entered during programmed playback, they will be
added to the currently-playing program.
® If the memory contains a previous program, the programmed
tracks will be newly added to the previous program. To enter a
completely new program, clear the previous program first.
e@ Pause can be programmed instead of a track number while
playback is stopped. Pressing the PAUSE key 44 displays "PA"
instead of a track number. In this case, the pause indicator will
not light.
[Exampie 1]
When recording on both sides of a cassette tape, enter a pause
after the last track that can be recorded on the first side. This will
allow a pause for changing the cassette side. Recording can then
resume on the second side.
[Example 2]
During a tape recording, a pause programmed between tracks
will produce a silent recording. A narration, etc., can then be
inserted before recording the next track.
18
<PRB1088>
E
NOTE:
Checking a program |
The PROGRAM indicator lights.
ceven iii iii Gib ii Hi HH iii Gi
dicts. nent me pi
j = meg
= mc -
£
Oo Sake
FE
ur |
= j_|
T
Program step is displayed.
Revising a program
The program step currently displayed will be changed.
While checking the program, change the program step with the
DISC NUMBER keys @ and TRACK NUMBER keys @.
Program Playback Start
2. Play ends.
When the last programmed step ends, the player goes to stop
mode and displays the first programmed step.
The disc returns to the magazine.
© During programmed playback, pressing the PGM key @ again
will turn off the PROGRAM indicator and the programmed
playback will be cancelled. However, normal playback will
continue. In this case, the program remains in memory.
(Program memory}