SKYSHL SS413F Series User Manual
  1. Manuals
  2. Brands
  3. SKYSHL Manuals
  4. Measuring Instruments
  5. SS413F Series
  6. User manual

SKYSHL SS413F Series User Manual

Ptical fiber fusion splicer
Hide thumbs Also See for SS413F Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Optical Fiber Fusion Splicer
SS413F Series User's Manual
Shenzhen SKYSHL Technology Co.,LTD.
V2019.08
Please read carefully this manual
before operating this model of the splicer.
Please follow all safety warnings and cautions in this manual.
Warning (Ignoring this warning, Incorrect use of fusion splicer may cause fatal and serious injury):

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS413F Series and is the answer not in the manual?

Questions and answers

Mohamed Emraan
May 23, 2025

Hi, I have a splice machine which requires the cameras re-calibrating. Can we have a quote on the repair cost etc.

0

Related Manuals for SKYSHL SS413F Series

Summary of Contents for SKYSHL SS413F Series

  • Page 1 Optical Fiber Fusion Splicer SS413F Series User’s Manual Shenzhen SKYSHL Technology Co.,LTD. V2019.08 Please read carefully this manual before operating this model of the splicer. Please follow all safety warnings and cautions in this manual. Warning (Ignoring this warning, Incorrect use of fusion splicer may cause fatal and serious injury):...
  • Page 2 SS413F Optical Fiber Fusion Splicer User’s Manual Warning! 1.The input voltage range of SS413F series fusion splicer is fixed. Do not use the power voltage outside the range specified. Please use correct AC and DC power supply. 2.Avoid the operation which may cause electrical shock, equipment damage, or even fire disaster, personal injury or death.
  • Page 3 Please strictly implement the relevant requirement of the manual. 3.Do not store the fusion splicer at a high temperature or high humidity environment. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 4 Please give full attention to the safety warning signs used on this model fusion splicer. High voltage warning signs: High voltage; no touch. High temperature warning signs: High temperature; no touch. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 5: Table Of Contents

    3.3.1 Overview............................43 3.3.2 Edit / Select ..........................45 [Calibration] operation ........................50 [Splice options] operation ......................51 3.5.1 Fusion splicing operation ......................51 3.5.2 Data display ..........................52 3.5.3 Ignored options .......................... 53 Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 6 Tension test ............................93 Storage of spliced fiber........................94 Reinforcement of fiber splice point....................95 4.7.1 Selecting heating mode according to heat-shrink sleeve material..........95 4.7.2 Selecting / Editing heating mode.....................96 Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 7 6 Problems and troubleshoot …………………………………………………117 Power supply ..........................117 Fusion splicing operation......................118 Heating operation ........................120 High lever settings........................120 Appendix A Warranty period and conditions ………………………………120 Contact us Appendix B ………………………………………………………...122 Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 8: Overview

    The machine is featured with fast splice speed, less splice loss, light weight, portable, applicable to backbone network, metropolitan network and FTTH project. In order to complete accurately the splice operation, please read carefully this user's manual. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 9: Product Specifications

    Multifunctional clamp is applicable to bare fiber, tail fiber, Fiber clamp jumper, covered fiber and stealth fiber. The clamp meets the requirement of industry standard FTTH fusion quick splicer. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 10 > 3000 times (times of arc). Built-in battery Continuous splicing, heating more than 350 times (typical environment). Power saving In “Power Save Mode" Under typical circumstances can function save 15% battery power Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 11 External 133(length)*163(width)*140(height) dimension Weight 1.6Kg(not including battery) □ SKYSHL splicer, powerful core, service oriented. □ Battery charging online, lasting longer. □ Splicing arc real-time control, no manual correction needed. □ 4.3" color LCD display, high strength panel. Shenzhen Skyshl Technology Co.,LTD.

  • Page 12: Standard Configuration Of Fusion Splicer

    — 1 copy Accessories warranty card Packing List 1 copy Accessories The following is optional parts of splicer. Hot joint clamp 1 piece Optional Heater clamp 1 piece Optional Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 13: Name Of Main Components Of Fusion Splicer

    1. 3 Name of main components of fusion splicer Heater left press plate Heater transparent window cover Heating groove Heater right press plate Electrode V-groov Left fiber clamp Right fiber clamp Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 14: Keypad Instruction Of Fusion Splicer

    In valid parameters cursor movement of fiber / moving cursor Entering Open manual drive Entering lower level splicing mode motor function at In valid menu menu pause /operation screen Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 15 ② ． For the detailed operation of [step by step splicing mode], please read "4.8 Motors operated manually " in this manual. 1. 5 Description of readiness screen of fusion splicer Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 16: Basic Operation

    To correctly and safely use this type of fiber splicer, the operator shall use the built-in high-performance battery and parts (power adapter and lithium battery)provided by our companyand read carefully the operation description in detail. 2.1.1Po Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 17 DC output power cable is connected to "DC IN" inlet of the power supply at the right side of the fusion splicer. The fusion splicer is powered then by the power adapter. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 18 <3>When the fusion splicer is powered by the power adapter, the indicator flashes at "DC IN" input at the right side of the splicer as shown in following drawing. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 19: Power Supply Of Lithium Battery

    As shown in the figure below, hold the splicer with and with the bottom facing upward, "independent removable battery" is installed at the bottom of the splicer. As indicated by the arrow, the splicer is powered by the "independent Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 20 Install"independent removable battery" B.Lithium battery capacity check After "independent removable battery" is installed in accordance with the steps above, the check operation is as follows. Start work Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 21 When “Battery capacity ＜ 10％ ” , the splicer will beep for about 30 seconds and shut down automatically . Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 22 <2>When the lithium battery is charged by the power adapter, the "red" indicator at "DC IN" input at the right side of the splicer is on as shown in following drawing, i.e. The lithium battery is charged by one time. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 23 <3>Battery charging is a complex chemical reaction process and the proper charger shall be used only for safety. The attendant must be at site during battery Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 24: Battery Hazard Warning

    Improper disassembly will damage the protective function of the battery, could cause short circuit in the battery core and cause the instantaneous heat, combustion, and other dangerous of the battery. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 25 The battery shall be charged in accordance with the correct way and charging for too long time could pose a safety risk. <7>Do not contact directly with battery leak electrolyte. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 26: Power-Saving Mode Operation

    Top right corner of the screen has battery under voltage icon and buzzer alarms automatically. At this point, the user should promptly use the power adapter or charge the lithium Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 27: Startup And Shutdown

    The splicer completes the normal soft shutdown. 2.7 Display brightness adjustment On the one hand, the display brightness determines power consumption, on the other Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 28 Select button to select the appropriate brightness value. The modified value is valid by the machine in default. <4>Continue to press button to return to readiness operation screen. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 29: Preparation Of Optical Fiber End Face

    B. Strip off the fiber coating with fiber stripping pliers. The bare fiber length reserved is 30-40mm. Wrap the fiber with absorbent cotton or cotton paper dipped in alcohol. Then clean the bare fiber. Clean the fiber with absorbent Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 30 Note the placement of 0.25mm D. Hold the cutter with left hand. Then push the sliding block of the cutter blade to the other end with the right hand to cut the fiber. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 31: Production Of The Fusion Splicing End Face Of Covered Optical Cable

    A.Put in advance a heat-shrink sleeve on the covered fiber cable before peeling the cover. Put about 50mm of the covered fiber cable into the stripper for peeling the cover. Penetrate the heat shrink sleeve as indicated by the arrow. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 32 2.8.4 Production of end face of tail optical fiber Follow the procedures above. Remove the outer cladding, tight cladding and Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 33: Placement Of Optical Fiber

    D.The end face of each fiber shall be placed between V-groove edge and the electrode rod centerline. V-groove edge Electrode centerline ● The following is the application of different types of fibers in FTTH projects: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 34: Management Menu

    900μm tail optical cable. ● Clamp shall meet industry standard FTTH heat melt fusion quick connector. 3.Management menu This chapter details the management of the operation menu of SS413F optical fiber Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 35: Overview Of First-Level Menu

    The options included in each operating window and the next level menu will be described in section 3.2-3.7 of this manual. The first-level main menu and six operating windows (second-level menu) are respectively: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 36 SS413F Optical Fiber Fusion Splicer User’s Manual A."Splice mode" B."Splice options" C."Heater mode" D."Calibration" Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 37: Splice Mode] Operation

    SS413F Optical Fiber Fusion Splicer User’s Manual E."Maintenance" F."Settings" 3.2 [Splice mode] operation Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 38: Overview

    Press button to switchover different windows. Press button in turn to return back to the original operation window. D.Description of some modes: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 39 Calibrating the arc strength of this splicing mode and "Auto - DS" mode. “Calibrate-NZ”:The arc intensity calibrated is local effective; Calibrating the arc strength of this splicing mode and "Auto - NZ" mode. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 40 B. Replacement of electrode. C. Normal or Special mode. D.Not used for a long-term. "Preheat splicing”: Select "Calibrate - SM" splicing mode; SM fiber splicing is repeated for 1 to 3 times. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 41 SS413F Optical Fiber Fusion Splicer User’s Manual Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 42 The operator can choose the appropriate splice Fiber Type mode in the database according to different fiber types and copy it to the user splice modes. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 43 Under certain conditions, the splice loss can be improved by Manually more than one time of arc. Changing this parameter can change adjusting arc the length of the arc time. time Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 44 The operator can choose the appropriate splice Fiber Type mode in the database according to different fiber types and copy it to the user splice modes. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 45 Changing this parameter can change time the length of the arc time. Fiber gap When setting the alignment and pre-arc, set the gap between setting right and left fiber end faces. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 46 Time of arc 1 Setting the time of arc 1. Intensity of Arc 2 is the second stage of arc. It sets the intensity of arc 2. arc 2 (Factory setting) Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 47: Edit / Select /Restore

    A.On the window of [select splice parameters file], select " ☆ " no. 1 and click button and "Edit, Restore, Export" option window appears. Move the cursor to "Edit" and click button. "edit splice parameter files" window of current default splice appears. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 48 (calibrate) shall be changed.The steps of "select" Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 49 ● "Export, delete, import" and other operating options are the special features and are recommended to be used with caution. <3> Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 50 "restore" column. B.Press button. "Continue to recover configuration data is displayed?" window appears. Continue to press button. "No.1 to No.4 splicing parameters" are restored automatically to the factory setting. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 51: Overview

    B.[Heater mode] has also 11 built-in factory modes (library), i.e. 11 sets of heating parameter files for the special use by the users (The heating parameter files in the factory mode "Library" shall be introduced into 40 groups of users heater modes). Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 52 (Some functions are optional). Heating control includes "Automatic" or "Manual" Heating control optional function. Setting the holding and delaying time of "heating Heat time temperature". Heating temperature Setting the thermostat heating temperature. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 53: Edit / Select

    In the window of [select heating parameter files], select " ☆ " no.1 and press button. "Edit, Export" option window appears. When the cursor moves to “edit” and click button, the current default "editing heating parameter files" appears Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 54 "20". Press again buttonto confirm that the modified value is valid.No.1 heating parameter has "Heat time 20s". C.Press continuously button, the machine is returned to the readiness window. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 55 "Edit, Export" option window appears.When the cursor moves to “edit”, click button and come to the window of "edit heating parameter file". The cursor moves down again to "fast heat". Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 56 If the operator adopts "Micro- 900" heat shrink sleeve, in order to meet the quality requirements, the operator shall select the heater mode of corresponding "material category". The steps of "select" heating parameter are as follows: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 57 It is forbidden to use hard objects and external force to press "U" heating groove, as the heater will be damaged therefore and cannot be used. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 58: Calibration] Operation

    As "arc calibration" function of SS413F fusion splicer is stopped at the factory, <2> Starting up is locked in “Calibrate”window of the primary menu and can not be operated. "Arc calibration" is locked and can not be operated. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 59: Splice Options] Operation

    Move the cursor to [splice options] window and click button to enter "edit splicing operation option” window. The important splicing options can be set. 3.5.1Fusion splicing operation: Parameter Description Table: Parameter Explanation Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 60: Data Display

    The operator can see the Pause 2 offset of the fiber core and the offset of the cladding at the same time. 3.5.2 Data Display: Parameter Description Table: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 61: Ignored Options

    Factory setting value 3.5.3 Ignore options: Parameter Description Table: Parameter Explanation Cleave 1.If it is set to "off", the splicer will judge and prompt Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 62 3.5.4Arc compensation: Parameter Description Table: Parameter Explanation Pressure If it is set to "On", arc intensity will be adjusted to compensate for changes in pressure and temperature. Temperature Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 63: Display Fiber Image

    X | Y: Horizontal display of fiber image in X and Y fields Estimate loss X: The image of X-field is magnified. Y: The image of Y-field is magnified. 3.5.6 Others: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 64 It is set to "On": If the fiber end face cleaved exceeds the limit value, the screen shows respectively "red unfilled Bad cleavedend face corner" overrun alarm message on the left and right fiber end faces. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 65: Maintenance] Operation

    In the readiness window as shown in following figure. Move the cursor to [maintenance] window and click button to come into "maintenance" window. The important product maintenance options can be set. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 66: Splice Records

    When the cursor moves to “inspect” and click button, the window displays the detailed information of current splice record number, as shown in following drawing Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 67 A. In "splice record" menu, press button."View, empty, export" option window appears. When the cursor moves to “export” and click button, "save record to USB storage?" dialog box appears. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 68: Splice Images

    USB flash disk. 3.6.2 Splice images "Splice image" provides the historic records of fiber splicing completed before. The machine can store maximum 100 spliceimages. (X, Y fiber spliceimages) Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 69: Electrode

    "Manufacture adjust 1" can be done under the guidance of the serviceman from the customer service center. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 70: Real-Time Revise

    "Real-time revise"belongs to factory default setting and shall not be set by the operator under normal circumstances. Description of "Real-time revise" function and advantages Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 71: Clear Real-Time Revise

    Therefore, the fibers set in "Auto - XX" and "Calibrate - XX" and the fiber to be spliced actually must Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 72 ②.Preheat splicing (see section 4.1.1 of this manual) After the real-time revise datais restored to the factory setting,the preheat splicing shall be Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 73: Open Arc Calibration

    Therefore, "shrink arc calibration" function is stopped in the default factory setting. No "manual arc calibration" is needed . Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 74: Status

    SS413F splicer: - 35 ℃ ~ + 60 ℃ operating environment. Monitoring the ambient pressure in present fiber splicing process. Atmospheric pressure Elevation range of SS413F splicer: 0 ~ 5000m operating environment. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 75 A. When the cursor moves to “system update” column and click button, "Please insert the sub device that contains update package before continue!" dialogue box appears. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 76 "in process of updating﹍" and time. After about 120S, the screen displays "Reboot ﹍ update successfully". The fusion splicer restarts automatically and returns to the readiness screen. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 77 <1> Insert USB flash disk into the computer's USB port. Move the cursor to "My Computer" and double click the mouse to open "My Computer" desktop and find "KINGSTON (H)" folder. <2> Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 78 Allocation unit size (A) Default configure size Volume label (L) KINGSTON Format options (O) □Quick format (Q) □Enable compression (E) □Create a MS-DOS startup disk (M) Start (S) Shut down (C) Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 79 □Create a MS-DOS startup disk (M) Start (S) Shut down (C) <6>Formatting operation will be done quickly. "Format Complete" dialog box appears. Formatting KINGSTOH(H) For mat compl et ed Conf ir m Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 80 □Enable compression (E) □Create a MS-DOS startup disk (M) Start (S) Shut down (C) 3.6.11About "About" provides the model, serial number, software version and related hardware information of the fusion splicer. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 81: Settings] Operation

    <1>In "Settings" menu, move the cursor to "Time" column and press button."Time" setting window appears.Continue to press button to show "Set Date & Time" and detailed time information. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 82: Language

    There are upside and underside options. The rollover operation steps are as follows: <1> In "Settings" menu, move the cursor to "monitor position" column and press button."upside, underside" option window appears. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 83: Lcd Brightness

    This function is very important to improve lithium battery duration and battery life. When this function is turned on, the fusion splicer does not operate within the set time. It will automatically enter the sleep state or power off. <1> Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 84 "1 ~ 60min" or "off". If moving the cursor to "off" column and pressing button, the sleep time of the fusion splicer is set to “off”: No sleep time is set in the splicer. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 85 Automatic shutdown time setting range is "1 ~ 120min" or "off". Move the cursor to " ×× min" and press button.The current automatic shutdown time ×× min setting of the fusion splicer is effective. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 86 3.7.6Menu Lock In order to prevent incorrect operation of the machine, not cause the changes of the parameters of the machine, not affect splicing quality, to preserve the historic Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 87 On: First 12 of 100 groups of user mode parameters are locked and can not be edited. Splicing file editing Off: First 12 of 100 groups of user mode parameters can be edited. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 88 On: The calendar settings are locked and can not be operated. Calendar Off: Calendar setting can be operated. On: "Clear-up arc numbers" can not be operated. Clear-up arc numbers Off: "Clear-up arc numbers" can be operated. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 89: Menu Lock

    (including the combination of extreme working conditions). Therefore, under normal circumstances, the fiber can be directly spliced. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 90: Preheat Splicing

    "Auto - MM" or "Calibrate - MM" mode to splice MM fiber. "Calibrate - DS/NZ" modes are similar to "Calibrate - MM" modes (omitted). C."Auto - XX" mode: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 91: Special Precaution

    As shown in following figure, move the cursor to "maintenance" window. Select “Clear real-time revise data” and press button. The real-time revise data is restored to the factory setting. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 92: Select Splice Mode According To The Type Of Optical Fibers

    4.2 Select splice mode according to the type of optical fibers <1> Different fibers have different splice parameters. In the fiber splice operation, depending on the type of fibers to be welded, the user shall choose a suitable fiber Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 93 MFD: 9-10μm wavelength: 1550nm. For splicing non-zero dispersion shifted fiber. MFD：9-10μm wavelength: 1550nm WDM fiber can be spliced in this mode. For splicing multimode fiber MFD：50.0-62.5μm Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 94: Selecting / Editing Splice Mode

    (splice parameter file): No.1, Auto SM. If the user has not selected other "splice parameter files",No. 1 is used by default as "splice parameter files" in the current Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 95: Fusion Splicing Operation

    Fiber splicing Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 96 Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 97: Automatic Alignment And Splicing

    After optical fiber inspection is complete, the fibers will be aligned according to the manner of "core to core" or "clad to clad". Then produce the arc and splice the fibers. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 98: Estimation Of Splice Loss

    SS413F Optical Fiber Fusion Splicer User’s Manual 4.4.3 Estimation of splice loss After fusion splicing is completed, the splice loss estimated value will be displayed. Screen Data Description: Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 99 It is recommended to limitthe number of arcs. The user can edit it in "Others" (Section 3.5) menu in [Splice options]. When different fibers (different diameters) or multimode fiber are spliced, ● Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 100 Too thick much feed of fiber. ▲Or reduce "overlap". Inappropriate arc intensity. Doing "arc calibration". Some parameters ▲Adjust "fiber pre-melting intensity", Too thin inappropriate. "Fiber pre-melting time". ▲Or adjust "overlap". Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 101: Tension Test

    The fusion splicer will preform automatically the tension test of the fiber. 4.5.3 When the fiber splice point is not broken during the tension test, it will show "tension test is completed." Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 102: Storage Of Spliced Fiber

    4.6.2 When 10000 splice results have been stored, the 10001 result will overwrite the first result. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 103 Length Set the length of heat shrink sleeves: 60mm, 40mm, 20 mm, etc. category Some length types are optional. Heating Heating control includes "Automatic" or "Manual" optional control function. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 104 <3> According to fusion splicing demand, the user can select and edit the current"splice parameter files". For specific steps and requirements, please refer to "3. 3.2edit/ select" of the manual. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 105: Heating Operation

    Move the fiber so that the splicing point is at the center of the heat shrink sleeve. Open the heater transparent window cover. Gently Pinch pull Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 106 Heater temperature in heating process is high. Do not touch the heating groove and heat-shrink sleeve . <5> Observe heat shrink sleeve after heating, qualified product inside is free of bubble and dust. B.Automatic heat control Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 107 SS413F Optical Fiber Fusion Splicer User’s Manual User-friendly heating operation, SS413F series of fusion splicers are provided with automatic heat control mode. <1> Refer to "3.3.2 edit/ select" of the manual.in "Select heating parameter files" window, "Manual" of "heat control" is set to "Auto" mode,realizing automatic heater mode.

  • Page 108: Motors Operated Manually

    "Left fiber (right fiber)" and then press button.After confirming "Left fiber (right fiber)" operation items,the feeding and aligning motors of the left fiber (right fiber) can be set as follows. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 109 Comparison table of X (Y) field feed motor and alignment motor X (Y) field feed motor Left feed motor Forward Backward Right feed motor Backward Forward X (Y) field alignment motor X field alignment Upward Downward motor Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 110 The fibers can be spliced by the arc of the fusion splicer. <6> After splicing, the machine will automatically calculate "splice loss" and it is displayed on the screen. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 111: Inspection And Maintenance

    <1> Open the wind cover. <2> Clean with a thin cotton swabs moistened with alcohol the bottom of V-groove, and wipe off with a dry cotton swabs the alcohol left in the V-groove. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 112: Cleaning Fiber Clamp

    <2> Cleaning fiber clamp according to following steps: Open the wind cover. Clean with a thin cotton swab moistened with alcohol the surface of fiber clamp, then wipe with a dry cotton swab the clamp. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 113: Cleaning Led In Light Bracket

    So the operator shall regularly clean two objective lenses, otherwise, the dust will be accumulated and eventually can not be removed. 5.4.1 Routine Maintenance Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 114 <1> Before cleaning the lens, turn off first the power of the fusion splicer. <2> Roll specific lens paper into a stick,then fold and tear out, then clean the mirror, objective lens surface with the rough edge of the stick. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 115 It is recommend to replace the electrode after 3000 times of arcs. If the machine continues in service without changing the electrode, it will increase splice loss and reduce the strength after fusion splicing. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 116 <4> Install the clamp on the electrode and tighten screws. Do not tighten the screws with the force larger than ● finger's force. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 117: Stabilizing Electrodes

    "Operation electrode" lower level menu.Move the cursor to "stabilizing electrode" item. <2> Continue to press button and enter "stabilizing electrode" operation window.Move down the cursor to "run" item. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 118: Clear Arc Times

    "stabilizing electrode" operations are needed. 5.7 Clear arc times This function can reset the times of arcs. <1> In the "operation electrode" menu, move the cursor down to "clear arc times" item. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 119: Dust Check

    5.8.1 This feature allows the user to check the dust or dirt on the optical path and determine whether they affect the detection on the optical fiber. 5.8.2 Operation steps Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 120 The screen switches to Y image. Continue to press button. The fusion splicer completes soon "Y image check Ok". If there any any dust points, the position is shown Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 121: Maintenance Of Cutter

    <3> After each use, it is to be noted that the rubber press pad shall be free of any residual broken fiber or other debris. The cutter after cleaning shall be put into a Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 122: Adjustment Of Blade Height

    5.9.4 Replacement of blade The average life of the blade is about 48,000 times of cutting To ensure the cutting Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 123 <3> The blade mounted on the machine is very sharp. Do not touch it with hand (or other parts of the body) in case of injury. <4> Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 124: Calendar Setting

    This feature not only provides users with information about the current operating environment, but also improves fusion splicing properties and provides software correction values. Operation steps: please refer to "3.6.9 status" of the manual. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

  • Page 125: Replacement Of Spare Lithium Batteries

     At high altitudes, arc current will increase. In this environment, the battery capacity will decrease rapidly.  AC / DC adapter is not the model provided by our company, or the charging time is not enough. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 126: Fusion Splicing Operation

     When the fusion splicer is powered by the battery,the operator shall turn on the power-saving function.If the fusion splicer does not operate after a little time, the display will shut down automatically. Press any button to return to a normal Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...
  • Page 127 Splice loss estimation and actual value are inconsistent.  Splice loss estimate is an internal calculated value of the fusion splicer,only for reference. Splicer optical components may need to be cleaned.   Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 128: Heating Operation

    The warranty period of the fusion splicer is: Optical fiber fusion splicer host:2 years; Fusion splicer display: 1 year; Power adapter: 1 year; Lithium battery charger: 1 year; Fusion splicer battery: 6 months. Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...
  • Page 129 The charge-discharges in normal use are less than 300 times Before delivering the fusion splicer, please contact the manufacturer or dealer. and the extended use is strictly prohibited. Mainte Shenzhen Skyshl Technology Co.,LTD. Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net...

  • Page 130: Appendix B Contact Us

    <4> List of parts in the machine. Appendix B: Contact US If you have questions or suggestion about the product,please contact us for help: Shenzhen Skyshl Technology Co.,LTD Address: C-211,Qixing Industrial Area,LongTian Road,PingShan Direct,Shenzhen City,Guangdong,China. WhatsAPP/Wechat:+086-18923700205 Sales email: sales1@skyshl.net After Sales email:af@skyshl.net...

Table of Contents