Noselift system for 911 carrera 4/4s, 911 turbo, techart gtstreet/r all gt2, gt2 rs, techart gtstreet s/rs until my09 gt3/gt3 rs until my09 gt3/gt3 rs starting my10 cayman all boxster all (50 pages)
Power-kit 09y / t1 / t1.1 / s1.1 / t1.3tauchen for cayenne turbo e3 as of my18 for cayenne turbo s e-hybrid e3 as of my19 for cayenne gts e3 as of my20 for cayenne turbo gt e3 as of my22 (24 pages)
Trunk box device box for cayenne starting mj11 (7 pages)
Summary of Contents for Techart 096.100.480.009
Page 1
TECHART Luftkanalverkleidung für 996 Turbo TECHART Rear air intakes for 996 Turbo Art-Nr. 096.100.480.009 Art-Nr. 096.121.480.009 Carbon TECHART Automobildesign GmbH 71229 Leonberg l Röntgenstrasse 47 TEL +49 (0) 7152 / 9339-0 l FAX +49 (0) 7152 / 9339-33 l E-Mail tuning@techart.de...
Page 2
Lufteinlass an der Vorderkante gleichmäßig mit einem Montagekeil anheben und ausrasten. (Abb. 1.1) Lufteinlass nach vorne aus dem Luftkanal herausziehen. 2. TECHART Luftkanalverkleidungen montieren Beiliegende Schablonen entlang den Außenkanten ausschneiden, wie in den Abb. 2.1 bis 2.3 gezeigt, Befestigungslöcher anzeichnen und bohren.
Page 3
(Fig. 1.1) Pull out the air intake from the air duct towards the front. 2. Install TECHART air intakes Cut out the enclosed templates along the outside edges, as shown in fig. 2.1 to 2.3, mark mounting holes and drill. (6 mm) Fix the air intakes with the enclosed screws (fig 3.1 and 3.2)
Page 4
MONTAGEANLEITUNG Mounting instructions Anlage- Abb. / fig. 1.1 Abb. / fig. 2.1 Abb. / fig. 2.2 Kontur Outline Bohrung Drilling 6 mm Abb. / fig. 2.3 Abb. / fig. 3.1 Bitte beachten! Bei der Schablone links und rechts nicht verwechseln! NOTE! Do not mix-up the left and the right side of the template.