Download Print this page

BWI Eagle AIR-EAGLE XLT 441-4500-AC Manual

900 mhz rf repeater

Advertisement

Quick Links

AIR-EAGLE XLT
441-4500-AC
900 MHz RF Repeater
Document Date: 7/112023
Product Rev: 0

Advertisement

loading

Summary of Contents for BWI Eagle AIR-EAGLE XLT 441-4500-AC

  • Page 1 AIR-EAGLE XLT 441-4500-AC 900 MHz RF Repeater Document Date: 7/112023 Product Rev: 0...
  • Page 2: Warranty Statement

    441-4500-AC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing.
  • Page 3: Installation

    441-4500-AC INTRODUCTION The Air-Eagle XLT RF Repeater is designed to retransmit an RF signal from any Air-Eagle XLT Transmitter. When placed in an area where the signal is weak, this unit will pick up the weak signal and retransmit it at full power facilitating greater distances and allowing the RF signal to reach around corners, through tunnels, over hills, and through valleys.
  • Page 4: Terminal Strip Wiring

    441-4500-AC TERMINAL STRIP WIRING Terminal 1 100-250 VAC Power Input Terminal 2 100-250 VAC Power Input Terminal 3 Terminal 4 Terminal 5 Terminal 6 Terminal 7 Terminal 8 Terminal 9 Terminal 10 Not used on this model. Terminal 11 Terminal 12 Terminal 13 Terminal 14 Terminal 15...
  • Page 5: Controls And Indicators

    441-4500-AC CONTROLS & INDICATORS RX LED Yellow LED illuminates while remote signals are being received. POWER LED Green LED illuminates while power is applied. TX LED Red LED illuminates while remote signals are being re-transmitted. RF Module that transmits/receives data SEL1 Used to set frequency...
  • Page 6: Specifications

    STANDARD ANTENNA (INCLUDED) 900MHz TNC Portable “Rubber Duck” Antenna 49-1103 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 900MHz Thru-Hole/Bracket Mount Mobile Antenna 49-2101 900MHz Magnet Mount Mobile Antenna 49-2102...
  • Page 7 441-4500-AC DIMENSIONS...