Table of Contents
Advertisement
12
Braille display with buttons right and left
Commissioning
The device may only be commissioned by trained personnel. The operator must provide
proof of this instruction. The device may only be put into operation if no damage to the device
or the supply lines is visible and no malfunctions are to be expected (see Safety instructions,
from page 6).
Switching on and off, idle state
The devices of the BRAILLEX EL c series switch on automatically when the USB connection
to the running PC is established. In operation, sleep mode is activated after five minutes if no
key is pressed or no change is made to the display.
As soon as the Braille display is switched on, the Braille display shows a startup message,
e.g.: braillex el#40c rev #124
Advertisement
Table of Contents
