Polygroup FunSicle Pool Canopy User Manual page 3

Pole
Upper
Clamp
STEP 4: Turn the Wing Knob counter-clockwise to loosen the clamp (see Figure A). Attach
the pole onto the pool's vertical beam. Then, turn the Wing Knob on the clamps
clockwise to tighten.
STEP 5: Unclip the Cam Lock to raise the pole to the desired height. Once the pole height
is adjusted, lock the pole into place (see Figure B).
STEP 6: Adjust the Canopy Belt, then buckle it to the top of the pole (see Figure C). Canopy
should have a slight bow, and should not be pulled too tight.
STEP 7: To create better shade, adjust the canopy height (see Figure D). Detach the belt
buckle, adjust each poles' length and clamps' position. After the height is adjusted,
buckle the belt to secure in place.
B
Cam Lock
A
Wing Knob
Parts List
1
3 Upper Clamps
4
Knob
Guiding Slot
STEP 1
2
3 Lower Clamps
Knob
Lower
Locking Hole
Clamp
NOTE: Make sure the
Knob snaps into the hole
on the Lower Clamp.
STEP 2
D
3
3
STEP 3
Canopy
C
Belt
1
2
1 Canopy
3 Poles