Advertisement
Welcome!
Congratulations on your new Funsicle Pool Canopy for round above ground frame pools.
This guide will walk you through everything about assembling your Pool Canopy.
As always, we're here to help. For any issues, questions, or extra support, visit
funsicle.com/support, or contact Customer Service at 888-670-4FUN (888-670-4386) or
HelloFun@Funsicle.com.
Safety Guidelines
Safety Guidelines
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this product, basic safety precautions should always be followed,
including the following:
READ AND FOLLOW ALL INSTRUCTIONS
Keep this User Guide for future reference.
Warnings
•
During poor weather conditions (e.g. heavy rain, snow, or strong winds), make
sure to dismantle the pool canopy completely from the pool and keep all the
parts in a safe place.
•
Do not place the canopy near any heat source.
•
Do not use the canopy poles as support when entering or exiting the pool. The
poles cannot support the weight of a person.
•
Do not over-stretch the canopy, pulling the canopy too tight may cause the
clamps and poles to collapse into the pool.
Assembling the Pool Canopy
•
Pool Canopy Model P501418F: Fits 14 to 18 ft metal frame round pools.
Pool Canopy Model P502024F: Fits 20 to 24 ft metal frame round pools.
•
Check to make sure the vertical legs or your pool belong to one of the shapes and
sizes as the following:
Shape
Size
STEP 1: Remove one Pole and one Upper Clamp from the packaging. Insert the Pole
through the hole of the Upper Clamp.
STEP 2: Install the Lower Clamp the same way as Step 1.
STEP 3: Repeat Steps 1 & 2 for all 3 poles.
A
66mm in width,
60mm in width,
D-shaped
D-shaped
B
C
55 X 35 mm,
Oval
2
2
D
E
1.5", Round
1.25", Round
Advertisement
