Advertisement
TIMER RECORDING
H
ayaa
3
2
MER
REC
/ WAKE-UP
5
'Siabad
TIMER REC
~
ts
/\WAKE-UP
Per
2
| Timer recording setting
@Records an FM or AM broadcast at the set time,
Example ; When setting from 7:30 AM to 9:00 AM.
Before beginning
(> Load Tape ll with a cassette
tape for recording. (Recording
begins in the forward direction.)
Set the tuner to the station you want to record.
The station you set hare is memorized.
2: Volume levetis at the minimum setting when timer operation
|
begins.
Se
4. Switch power ON, and select the tuner (FM/AM) function.
2. Press the TIMER REC/WAKE-UP button.
"WAKE-UP"
is displayed.
3. Press the (jor [=] button to select REC.
Each time the button is pressed, the display changes in the
following sequence:
WAKE UP @#% REC
4. Press the TIMER REC/WAKE-UP button.
5. Set the timer start time. First, set the hour using the
(3 or C=] button, and then press the TIMER REC/WAKE-
UP button. Set the minutes in the same way as you set the
hour.
6. Set the timer finish time. A finish time one hour later than
the start time is automatically displayed. First, set the hour
using the [=] or [=} button, and then press the TIMER
REC/WAKE-UP button, Set the minutes in the same way as
you set the hour.
7. The unit switches to the Check mode, and start/finish times
and the recorded broadcast station are displayed.
8. Switch power OFF. The unit is now in the STANDBY mode.
9. Press the TIMER
REC/WAKE-UP
button
until the timer
indicator (@) REC) lights. The mode then changes to the
Check mode.
To cancel:
After setting or during setting, press the TIMER RECMWAKE-UP
button until the timer indicator (@) REC} goes out.
eEither Wake-up timer or Timer recording setting is possible,
but not both.
e After timer recording is performed once, settings are canceled.
#When
you
want
to change
the timer
recording
settings
or
when
you
make
a mistake
during
setting,
repeat
setting
procedures from the beginning.
eff you press the TIMER REC/WAKE-UP
button during timer
operation, timer operation is canceled.
NOTE:
During
Standby,
press
the DISPLAY
CLOCK
ADJ
button
to
confirm
timer settings.
Remember
that pressing
the TIMER
REC/WAKE-UP button changes settings.
25
<ARB7114>
Advertisement
