Table of Contents
Advertisement
Q
SD
>
=
$
D
2]
Connections
This tells you how to connect with an aerial. TV, etc.
Tuning the TV to your VTR
The VTR supplies a signal to the TV set via the RF coaxia!
cable on channel 36 of the UK broadcasting system. Your
TV must be
tuned into this channel in order to view the VTR.
if the connection to the TV includes the 21-pin scart cable or
Audio/Video cable, the playback picture can be viewed by
selecting AV on your TV, The RF coaxial cable must still be
connected as shown on page 8, but the TV need not be
tuned to channel 36.
4
as
Infra-red Remote Controller
Controls and Connection Sockets
This gives a detailed explanation of the function of each
bulton, switch and connection socket.
Seiting the Clock of the VTR using
the Remote Controller
The built-in ciock is used to activate the timer for automatic
recording and must be set to the correct time.
Setting the Remote Controller for
Operation of your TV
You can operate some makes of TVs using the supplied
Remote Controlier after this setting up.
Storing TV Broadcasts into your ,
VTR
The VTR :s fitted with its own TV tuner Gust like a normal TV
se?) and ce be tuned to receive up to 42 TV broadcast
stations
Advertisement
Table of Contents
