Panasonic NV-HD90 Operating Instructions Manual page 21

Table of Contents

Advertisement

DATE
ON
OFF
To adjust the tracking and the
vertical locking
Fo: manual tracking adjustment
The + and — buttons are used to adjust the tracking when,
for example, noise bars on the picture are better removed
manualiy than by the automatic digital tracking contro;
Press both buttons together to return to automatic digital
tracking control.
For slow tracking adjustment
When noise bars appear during Stil! or Slow playback,
switch over to slow piayback and adjust with the — or ~
bution to reduce the noise bars.
Fo: vertical locking adjustmen?
Use
the + and = buttons to minimize any veriic:
1g Still-picture playsack
Playback
Other Playback Functions
To obtain High Speed Picture during Fast
Forward or Rewind
Keep FF pressed during fast forward,
Keep REW pressed during rewind.
fe
'
[Rew
i
To find the Beginning of Each Recording
Recording Index Signais
index signals are recorded in following cases.
'When a recording is started by pressing REC,
*When REC is pressed during recording.
=
When timer recording is activated.
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press INDEX PP twice during playback or stop mode.
ee)
After finding the specific recorded segment, playback
starts automatically.
4
For
the reverse direction, press INDEX 44.
#Up 10 20 programmes can be searched for in both
cirections.
When the incorrect numerical data has been entered,
ss STOP and enter the correct cata.
Tne figure on the display is decremented by 1 each time
an index signal is located. Bear in mind that the display
wl pe decremented in this way even while either INDEX
button is being pressed.
ere
4
7
The iNDEX search function can only work corréctly,
if the
index signals are spaced at least 3 minutes apart in the
SP moce and 5 minutes apart in the LP made.
TRe
Bas
One
Notes:
Cue. review o- slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
Ever af
nua! adjustment, noise bars or vertical jitter
may not be eliminated completely, especially for tapes
recorded on another VTR. This is not malfunction.
21

Advertisement

Table of Contents
loading

Table of Contents