Philips 37PF9731 User Manual page 7

Hide thumbs Also See for 37PF9731:
Table of Contents

Advertisement

2555.3 EN
29-01-2007
Use of the remote control RC4420 (Continued)
v
16:26
Pagina 7
b
Dual screen/PIP
Press the b key to switch on or off Dual screen or PIP,
according to the format selection made in the PIP format
list. See p. 23.
PIP allows you to call up a subscreen within the main screen
enabling you to watch two TV channels or a TV channel and
pictures from a peripheral at the same time.
Dual screen allows you to divide the main screen into two
subscreens enabling two TV channels or a TV channel and an
external source or a combination of one of them with
Teletext (see p. 37) to be watched simultaneously.
Note: not all combinations might be possible. In such a
a
case a message appears on the screen.
1. Press the cursor left/right to highlight the PIP window or
the left/right screen in Dual screen
2. Press the
order to change TV channels, external sources or teletext
pages in the highlighted screen.
Note: on screen information, which appears when
changing channels, always refers to the highlighted screen.
3. Press the b key again to return to a full main screen
picture.The TV tunes to the picture which was highlighted
in the Dual screen or PIP mode.
Notes:
- Audio only plays from the main, when PIP has been
selected, or from the left screen, when Dual screen has
been selected.
- When in Dual screen, two display formats are supported:
full screen or squeezed. Multimedia browser content will
always be displayed full screen.
- When PIP or Dual screen mode is activated, and a TV
channel or source is locked, the picture is grayed out.
- Programmes via a decoder/descrambler can not be
reproduced in the right picture.
Define the position of the PIP screen
1. Press the cursor right to highlight the PIP screen.
2. Press the red colour key on the remote control to select
Position.
Note: if no action has been undertaken, the function bar
at the bottom of the screen will disappear after a few
seconds. Press any colour key to make it re-appear.
3. Use the cursor keys to define the position of the PIP
screen.
To display the channels list.
FAV
You can create up to four favourite lists.
v key or the digit keys in
-P+
key or the
AV
EN
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

42pf983142pf9831/6937pf9731/69Cineos 42pf9831/69Cineos 37pf9731/69

Table of Contents