Table of Contents
Advertisement
2555.3 EN
29-01-2007
How to search for and store TV channels (Continued)
TV menu
Installation
Language
Channels
Preferences
Connections
Factory settings
Software upgrade
Info
TV menu/Installation
Channels
Autom. installation
Installation update
Manual installation
Rearrange
Info
16:26
Pagina 27
Installation update
This allows you to automatically tune to and update all
Channels
available channels.
Autom. installation
Installation update
Notes:
- this will not reinstall uninstalled channels;
Manual installation
- new channels found will not be added to any favourite
Rearrange
list;
- already installed channels will not be renumbered.
Manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) TV channels.
Manual installation
1. Select Manual installation and press the cursor right.
System
2. Select System.
Search
3. Select Search and press the cursor right.
Fine tune
4. Select the red or green colour key to proceed.
Store current chan.
Tip: if you know the frequency, enter the 3 digits of the
Store as new chan.
frequency with the digit keys 0 to 9 (For example, 049).
5. Press the cursor left to store the channel found or to
search for another channel.
6. Select Fine tune and press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
7. Select Store current channel if you want to store the
(fine tuned) frequency under the current channel number.
Press the cursor right and confirm with the
8. Select Store as new channel if you want to store the
(fine tuned) frequency under a new channel number.
Press the cursor right and confirm with the
9. Use the rearrange menu to rename or reshuffle the
channels. See next page.
Note: select System (PAL BG, PAL I, PAL DK or
NTSC M)
EN
key.
OK
key.
OK
27
Advertisement
Table of Contents
