Sony Super Bright VPH-1001Q Operating Instructions Manual page 8

Wole-balelaMclalemallialadielamelm@o)aidae) |
Remote Commander RM-PJ1044
The buttons on the Remote Commander and on the
control panel of the projector with the same name have
the same function.
=i ® o coe =
(1) LIGHT button [5] TEST button
Press to light the button indicators. {6] CENT R/B buttons
If you do not operate any button within about 30
seconds, the light automatically goes off. Arrow buttons
[2] Transmitter indicator POWER ON/OFF buttons
The light turns on each time a button is pressed. When Press to turn the projector on and off.
the indicator does not light, replace the batteries. [9] RESET button
[3] Mi SEL (memory select) button (10 PICTURE CONTROL buttons
[4] MUTING buttons Press to adjust picture condition, contrast, hue. color,
AUDIO: Press to mute the sound. To restore the sound, brightness and sharpness.
press it again or VOL +. VOL (volume) +/- buttons
PIC (picture): Press to cut off the picture. To restore the
picture, press it again or CONTR +.