Sony Super Bright VPH-1001Q Operating Instructions Manual page 7

Color video projector
Hide thumbs Also See for Super Bright VPH-1001Q:
Table of Contents

Advertisement

Available languages

Available languages

aceon an (Oo) alal=1a ce) al tl al=1 0)
(i) Red lens
RGB/COMPONENT IN connectors (BNC)
(2] Green lens
(VPH-1044Q9/1044QM only)
[3] Blue tens
R, G/G SYNC, B, SYNC/HD, VD connectors: Connect
to the analog RGB outputs of a video camera or other
[4] LINE IN connectors
video equipment.
S VIDEO connector (4-pin mini DIN)
R-Y, Y, B-¥ connectors: Connect to video equipment
Connect to the S video output of a VCR.
that output component signals, such as Sony Betacam.
eke icns eee
Speaker
onnect
to the video output of a
:
AUDIO jack (phono)
[9] AC IN socket
:
:
Connect to the audio output of video equipment.
Connect the supplied AC power cord (mains lead).
[5] VIDEO OUT connector (BNC)
(19 MAIN POWER switch (= ON/B OFF)
Connect to the video input of a color monitor.
Press to turn the main power on and off.
[6] CONTROL S INPUT/OUTPUT jacks
Connect to the CONTROL S jacks of other Sony
equipment.
CONTROL S INPUT (stereo mini): Connect to the
CONTROL S output jack of the supplied remote
control receiver for wireless remote control with the
supplied Remote Commander. If you connect to the
CONTROL S OUT jack of the Remote Commander,
you can use the Commander as a wired Commander.
CONTROL $ OUTPUT (mini): The signal from the
CONTROL S INPUT jack is output. Connect to the
CONTROL S INPUT jack of another projector when
two or more projectors are used.

Advertisement

Table of Contents
loading

Table of Contents