Table of Contents
Advertisement
Standard OSD Operation
1. Press MENU key to activate the OSD menu, when OSD is not displayed.
2. Use Select
key to move down through the menu cyclically. The parameter will be
highlighted when selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press MENU key. If no keys
are pressed for a time period, the OSD automatically disappears.
5. When OSD is not displayed, press + key to start Auto-Adjust.
6. When OSD is not displayed, press - key to turn speaker ON/ OFF.
OSD Function Description
Ite m
Brightness
Contrast
Analog Contrast To adjust Contrast in the part of analog input.
Auto Contrast
Color
Temperature
Auto- Adjust
Left/Right
Up/Down
H.Size
Fine
Function De s cription
To increase or decrease the brightness.
To increase or decrease the contrast.
Press + key to start auto analog contrast.
Pressing "- " or "+" to select 9300, 7500, 5500, NATIVE
and USER. Only when selecting USER, you can make
adjustments to the R/G/B content, otherwise not.
Press + and - simultaneously to restore to factory default
setting.
Press + to turn on this function. The Auto- Adjust will
automatically adjust V-Position, H- Position, Clock, and
Clock-Phase, the whole process takes about 5 seconds.
(Please install the attached LCD monitor utility disk for
Auto- Adjust).
To move the screen toward left or right.
To move the screen upward or downward.
To increase or decrease the size of image.
To increase or decrease the snow noise of the image.
English
AL702
11
Advertisement
Table of Contents
