Table of Contents
Advertisement
Standard OSD Operation
1. Press any front panel key to activate the OSD menu.
2. Use Select Up or Down keys to move up or down through the menu. The parameter
will be highlighted when selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press Select Up and Down
keys together at the same time. If no keys are pressed for a time period, the OSD
automatically disappears.
OSD Function Description
Ite m
Function De s cription
Brightness
To increase or decrease the brightness.
Contrast
To increase or decrease the contrast.
H-Position
To move the screen toward left or right.
V-Position
To move the screen upward or downward.
Phase
To increase or decrease the snow noise of the image.
Clock
The dot clock is fine- adjusted after auto adjust.
OSD
To move the OSD position horizontally on the screen.
H-Position
When the "+" key is pressed, the OSD control menu will
move to the right side of the screen. Likewise when the "- "
key is pressed, the OSD control menu will move to the left
side.
OSD
To move the OSD position vertically on the screen.
V-Position
When the "+" key is pressed, the OSD control menu will
move to the up side of the screen. Likewise when the "-" key
is pressed, the OSD control menu will move to the lower
side.
Volume
To increase or decrease the sound level.
English
AL502
11
Advertisement
Table of Contents
