Device Control; Switching The Device To Standby - Grundig 32 GHW 5740 User Instructions

USING­EXTERNAL­DEVICES
Device­Control
You can determine how the remote control of
your television will control the external device.
1­ Press » « and use »
either one from »HDMI1« to »HDMI3« and
press »OK« to confirm.
2­
Open the menu with »MENU«.
3­ Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
4­ Select the menu item »Source« with »
<
» « and press »OK« to confirm.
Settings > Source
Picture Sound Source
Device
Remote Behavior
Put device into standby
Change Area Select
5­
Select the line »Remote Behavior« with »
or » «.
Λ
6­ Select control type (»Pass-Through«, »Deck«
<
or »Zap«) with »
Notes:
»Pass-Through« is included in the menu as
7
an option that can be selected in every
device type. »Deck Control« and »Tuner
Control« options change depending on the
external device connected.
Apply trial and error method to determine
7
the functions of the remote control buttons
for the selected control type.
Refer to the user manual of the DIGILINK
7
compatible device for its functions.
7­
Press »EXIT« to end the setting.
< >
« or » « to select
«, »
V
>
« or
Tuesday
xx xxx xxxx
TV Timer Parental
- - - -
None
BACK
>
« or » «.
­ - --------------------------------------------------------------
Switching­the­device­to­standby
This option switches the connected external
device to standby.
1­ Press »
either one from »HDMI1« to »HDMI3« and
press »OK« to confirm.
2­
Open the menu with »MENU«.
«, 3­ Select menu item »Settings« with »
Λ
< >
» « or »
4­ Select the menu item »Source« with »
<
» « and press »OK« to confirm.
5­
Select the line »Put device into standby«
with » « or »
V
confirm.
– T he connected external device is switched
off.
Back
«
V
< >
« and use » « or » « to select
« and press »OK« to confirm.
« and press »OK« to
Λ
ENGLISH
«, » «,
V Λ
>
« or
55­