Sony Super Bright VPH-1000Q Manual page 7

Position and Regist
Installation and preliminary adjustments should be
carried out by qualified Sony personnel.
When the projector is installed on a desk or on the floor
using the pedestal, it can be easily moved but it may be
necessary to readjust the registration.
1
1 Depress the POWER switch (ON).
2 Depress the PROJECTOR switch (ON).
3 Set the NORM/TEST selector to TEST.
The built-in cross-hair test pattern will be displayed.
Acheck if the test pattern is centered and
focused.
If not, move the projector slightly so that the
pattern is clearly displayed.
out of focus and
registration
For the appropriate distance between the projector and
the screen, see pages 10 to 17.
5 Adjust the H CENT and V CENT controls so
that the red and blue lines converge with the
green line and the test pattern is seen as white.
Turn the controls clockwise to move the red and blue
vertical lines to the right; turn counterclockwise to move
to the left.
forred for blue
w &
R B
| ee |
H CENT
Turn the controls clockwise to move the red and blue
horizontal lines upward; turn counterclockwise to move
downward.
for red for biue
Oy «ey
V CENT
6 After the adjustment is complete, set the NORM/TEST
selector to NORM.
| ysi6uz |