Table of Contents
Advertisement
stem Connections
Notes on Con
First make sure that the power to each piece of
¢ For connection to the VIDEO IN and TO VPR-722S
equipment is turned off.
connectors, the connecting cable may be extended to max.
© The cable connectors should be fully inserted into the
50 m (164 feet 4/2 inch). If the connecting cable is longer
jacks. A loose connection may cause hum and noise.
than 50 m, picture quality may be impaired somewhat.
*To disconnect the cable, pull it out by grasping the plug.
* Read the instruction manual of the equipment to be
Never pull the cable itself.
connected.
¢ Use suitable connecting cables according to the
equipment to be connected.
to a wall outlet
=
AC power cord
(supplied)
to MONITOR
OUT VIDEO
to LINE IN S VIDEO
to S VIDEO
output
to video
input
to audio
output
Color
monitor
VCR equipped
with S VIDEO
connector
Camera control unit
Video camera
18
to SYNC/HD
to LINE
IN VIDEO to LINE
IN AUDIO
to RGB outputs
e.g. Sony Betamax
video cassette
recorder
to SYNC output
to audio output
e.g. Sony U-matic
videocassette
recorder
* Connections using the RGB IN connectors are for VPH-1042Q/
foyideo output
1042QM only.
Advertisement
Table of Contents
