Advertisement
1
1. After opening the Lens Protector, partially
depress the Shutter Release Button while covering
the Light Sensor as illustrated.
2. When the lamp (red and green) in the upper
section of the viewfinder glows, accompanied
by a beeping sound, the batteries are properly
placed in the chamber. If the batteries are
incorrectly loaded, or weak or dead, the Shutter
Release Button cannot be depressed, nor can film
be wound. If the batteries are weak, replace both
batteries with fresh ones.
Battery capacity
If the batteries are getting weak, the flash recycling
time and the auto winding/rewinding action
becomes noticeably slower.
7
Advertisement
