Connections - Aiwa AV-X300 Operating Instructions Manual

CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 230 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all other external
equipment first. Then connect the AC cord at the end.
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Red jacks and plugs : For the right channel of audio signals
White jacks and plugs: For the left channel of audio signals
Yellow jacks and plugs: For video signals
Insert the plugs fully into the jacks. Loose connections may
produce a humming sound or other noise interference.
The numbers in the illustration below correspond to the following details.
@ Center speaker
te <*
@)Surround speaker \\ an Y/,
Right Left ||
Es) ey
@M antenna @RHT-M301
Remote control
extender
(@MWI/LW antenna
to an AC outlet <j
IN
IDEO 1}
@ Subwoofer
SSSSSe5
[S3999008
@Speaker system A
Right Left
() Speaker system B
Right Left
OO
SSSss FRONT
<a
Tee] SIGNAL
to VIDEO IN
(Video 2)
to VIDEO OUT
LD/MD player
to AUDIO IN(Video 2/MD)
* When connecting a monaural video, use a
stereo-mono connecting cord (not supplied).
to AUDIO OUT,
to VIDEO OUT
to VIDEO IN
3 ENGLISH