Advertisement
JL3BR12
John Lewis
TESTING FOR LEAKS - DO THIS BEFORE USING YOUR BBQ
NOTE - DO NOT test for gas leaks with
an open flame. If you smell gas, turn off at the source.
Before first use, at the beginning of each new season, or whenever a gas cylinder is changed, you must check for
gas leaks.
Do so bv:
- Make a soap solution of one part liquid detergent and one part water
©
- The presence of bubbles indicates a leak. Tighten or repair as
necessary
- Under no circumstances should a naked flame be used to check
i for leaks
- If a gas odour is present and no leaks can be found, do not use
the bbq.Turn the gas off at the source, disconnect the hose and
immediately contact your bbq dealer or place of purchase for
assistance
8
Advertisement
