Table of Contents
Advertisement
This Demo Pin activates an
automatic GUIDE Plus+ demo.
RETAILERS
Do not remove this Demo Pin.
Removal will disable the auto-
matic demo.
CONSUMERS
Remove this Demo Pin and
insert the IR extender here
before using this TV.
R6 / AA
SOURCE
POWER
SELECT
TV
TV
CBL
VCR
AMP
HD
SAT
DVD
CD
ALT AUDIO
q
l
Q
VCR Plus +
INFO +
EXIT
a
a
a
a
a
GUIDE/TV
S
æ
Preparation
&
é
DEMO PIN
"
WARNING
Dispose of properly.
KEEP AWAY FROM CHILDREN
'
(
§
Do not insert the power plug in a wall socket before all connections
are made.
Place the TV on a solid surface.
For ventilation, leave at least 2" free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV.
Avoid heat, direct sunlight and exposure to rain or water.
Connect a cable TV signal, to the
best picture quality use the suppressor-aerial cable supplied.
ANT. / CABLE
Demo pin
Your new TV is equipped with a Retail Demo Pin inserted in the
connector at the back of the TV.
SHOOTER
On the retail floor with the Demo Pin inserted and the TV powered on, the
demo about
GUIDE Plus+
and insert the IR extender supplied into the
Remove the demo pin
connector. (See Connect Accessory Devices, p. 39 to connect your
SHOOTER
VCR/Cable converter box.)
This disables the Retail Demo feature and allows normal TV operation.
Insert the power plug in the wall socket. Refer to the rear of the TV set
for the correct operation voltage. Consult your local dealer if your AC power
supply is different.To prevent damaging the power (AC) cord which could
cause a fire or electric shock, do not place the TV on the cord.
Remote Control
Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
Press the TV button to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many areas exhausted batteries may not be disposed of with your
household waste. Please check on how to dispose of exhausted batteries according
to local regulations.
Turn the TV on
switch A on the front of your TV or press the red power
Press the
POWER
button on the remote control.
A green LED on the front of the TV lights up and the screen comes on.
When you switch on your set for the first time, the
automatically appears on the screen.
Follow the instructions shown on the screen to guide you through the first
time setup and use of your TV.
jack at the back of the TV. For
ANT./CABLE
is automatically activated.
Install
Preparation
IR
IR
menu
5
Advertisement
Table of Contents
