Source; Keypad On Top Of The Tv - Philips 34PW9815 Manual

Source

Settings
Select
TV
AV1 AV1: Name
AV2 AV2: Name
AV3: Name
AV3
AV4: Name
AV4
Side: Name
Side
Source
This menu allows you to select and/or name the accessory device you
connect to one of the AV inputs.
&
Select
The Source menu items appear.
é
Press the cursor down to select the menu items..
When you select
a source causes the TV to begin showing video and playing audio from the
selected source.
When you select
identify which type of peripheral is attached to this input.
The TV detects the presence of the connected peripheral and the signal is
routed appropriately.
The name selected is automatically added to the source in the Select list.
"
Press the menu Ï button on the remote control to turn off all menus on
screen.
'
Press the
The Source Select menu appears in which you may select a source or
peripheral connected to be displayed on screen.

Keypad on top of the TV

Should your Remote Control be temporarily unavailable, or lost or broken,
the buttonpad on top of the TV allows you to summon and to navigate the
CH
Main Menu, to tune TV channels, and to control the volume.
V
M
When the Main Menu is not displayed, the CH- or + buttons enable you
to select the TV channels, the V - or + buttons to adjust the volume.
Press the M button to summon the Main Menu and to confirm the selection
made (same function as the OK button)
Press the V - or + buttons to navigate left/right in the menu items.
Press the CH - or + buttons to navigate up/down in the menus.
Select the M button again or navigate to
with the cursor right.
Source
, a list appears, showing the available sources. Selecting
Select
, ,
AV1 AV2 AV3, AV4
button on the remote control.
SOURCE
or , a list appears allowing you to
SIDE
to dismiss the Main Menu.
Exit
Use of the menus
27