Table of Contents
Advertisement
t Settings
To check the greeting message
Press [GREETING CHECK).
•The greeting is played back and the display shows the elapsed time.
To erase the recorded greeting message
Press [GREETING CHECK!
+
press [erase] while the message is being
played.
•The unit will answer calls with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 7), one of two messages will
be played when a call is received, depending on the remaining recording
time.
To check the pre-recorded greeting,
press [GREETING CHECK 1.
• A pre-recorded greeting is played as follows:
"Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call."
When "BBH" is displayed;
"Hello, we are not available now. Please call again. Thank you for your call "
Flash Memory Message Backup
Messages are stored indefinitely on a "flash memory" 1C chip and will
not be affected by power failures. All of the messages are saved until
you erase them.
8
Advertisement
Table of Contents
