RAB FIELD-ADJUSTABLE TOMO-2 Instructions Manual

INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
TOMO- 2FT
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
The fixture is suitable for indoor applications. Suitable for damp locations. Ceiling, Canopy and Pendant mount only.
SURFACE MOUNTING
1. Secure Surface Mounting Plate to Junction Box (by others).
(Additional attachment to the ceiling may be needed
for longer fixtures). 8ft TOMO includes a 2nd Surface
Mounting Plate and Surface Mount Adapter Plate
(see Fig. 2).
Remove Silicone Plugs located on each end of the Housing
2.
Cover as shown in Fig. 2 (do not discard Silicone Plugs).
Pull the End Caps out of each end of the fixture as shown
3.
in Fig. 1. Separate the Housing Cover from the Lens and
Tray Assembly by sliding the Housing Cover either right of
left to unlock from Key Slots as shown in Fig. 3. Pre-installed
Tether Cables (2) will prevent Lens and Tray Assembly from
separating from Housing Cover (Fig. 1).
4. Pull supply wires from Junction Box (by others) through
center of Surface Mounting Plate. Use appropriate UL
rated wire connectors as required by NEC and local code
to make electrical splices to fixture leads.
Surface Mount Adapter Plate to the Housing Cover.
5. Align
Using (4) Screws (provided) secure Surface Mount Adaptor
Plate and Housing Cover to the Surface Mounting
Plate.
6. Follow appropriate wiring instructions per code (Fig. 12).
Push Lens and Tray Assembly into the Housing Cover.
7.
Align Keys into Key Slots and slide to the right or left to
lock the Housing Cover into the Lens and Tray Assembly.
Snap on End Caps and insert Silicone Plugs into Housing
Cover.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.
TOMO- 4FT
Surface Mount Adapter Plate
Fig: 1
End Cap (2)
Fig: 2
Cable Coupler Knockout
Fig: 3
Housing Cover
TOMO- 8FT
Surface Mounting Plate
Screws (4)
Lens and Tray Assembly
Silicone Plugs (2)
Surface Mount Adapter Plate
Power Cord Knockout
Lens and Tray Assembly
Key Slot
Housing Cover
Tether Cable (2)