RAB TOMO- 2FT Installation Instructions

INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
TOMO- 2FT
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
The xture is suitable for indoor applications. Suitable for damp locations. Ceiling, Canopy and Pendant mount only.
CEILING MOUNTING
1. Secure Surface Mounting Plate to Junction Box (by
others). (Additional attachment to the ceiling may be
needed for longer xtures ). 8ft TOMO includes a 2nd
Surface Mounting Plate and Surface Mount Adaptor
Plate for optional use (see Fig. 2).
Remove End Caps as shown in Fig. 1. Separate the
2.
Housing Cover from the Lens and Tray Assembly by
sliding the Housing Cover to the right to unlock from Key
Slots as shown in Fig. 3. Pre-installed Tether Cables (2) will
prevent Lens and Tray Assembly from separating from
Housing Cover as shown in Fig. 1.
3. Pull supply wires from Junction Box (by others) through
center of Surface Mounting Plate. Use appropriate
UL rated wire connectors as required by code to make
electrical splices to fi xture leads.
Surface Mount Adaptor Plate to the Housing
4. Align
Cover. Using (4) Screws (provided) secure to the Surface
Mounting Plate.
5. Follow appropriate wiring instructions per code.
Push Lens and Tray Assembly into the Housing Cover.
6.
Align Keys into Key Slots and slide to the left to lock the
Housing Cover into the Lens and Tray Assembly. Snap
on End Caps.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.
TOMO- 4FT
Surface Mount Adaptor Plate
Fig: 1
End Cap (2)
Fig: 2
Fig: 3
TOMO- 8FT
Surface Mounting Plate
Screws (4)
Surface Mount Adaptor Plate
Housing Cover
Key Slot
Housing Cover
Tether Cable (2)
Lens and Tray Assembly
Lens and Tray Assembly