Front Panel Facilities - Pioneer A-X700 Service Manual

2. FRONT PANEL FACILITIES
FRONT PANEL
(?
NOH,
©)
©)
@) POWER switch
Press to turn power to the unit ON and OFF.
Depressed position (ON):
Power is supplied to the unit.
Released position (OFF):
Power to the unit is disconnected.
(2) FUNCTION switches/indicators
[PHONO] — Press when listening to record playback
on a turntable.
[TUNER] — Press when listening to AM or FM broad-
casts with a tuner.
[CD] — Press when listening to a compact disc
playback with a CD player.
[VIDEO/ AUX] — Press when listening to programs
from a component connected to the VIDEO/ AUX ter-
minals.
[TAPE 1] — Press when listening to tape playback
with a tape deck.
[TAPE 2/ ADAPTOR] — Press when using a compo-
nent (sound processor, graphic equalizer) connected
to the TAPE 2/ ADAPTOR terminals. Also can be used
during tape playback when a tape deck is connected to
these terminals.
NOTE:
When a component is not connected to the TAPE 2/ADAP-
TOR terminals, or when the component connected is not be-
ing used, be sure to set the {TAPE 2/ADAPTOR) switch to
the OFF position (the indicator will go out). If set to the ON
position, No sound will be heard.
ood ®
(3) FLUORESCENT DISPLAY
[VOLUME/BALANCE] — Normally (VOLUME) in-
dicates the sound volume. The larger the numbers, the
larger the sound volume. When the BALANCE switch
is pressed, the display's function switches to in-
dicating the right/left balance of sound (after a few
seconds, the display will automatically switch back to
its volume function).
[LOUDNESS] — Lights when the LOUDNESS switch
is set to the ON position.
[MUTING] — Lights when the MUTING switch is set
to the ON position.
@) VOLUME switches
These are used for controlling the sound volume.
[VOLUME UP] — Increases the sound volume.
[VOLUME DOWN] — Decreases the sound volume.
G) PHONES jack
When using headphones, insert their plug into this
jack. The sound from the speakers will automatically
be disconnected.
® MIC jack
When using a microphone, insert its plug into this
Jack.