Paperfox FTD-1T Instruction Manual page 7

Otherwise, this function should not be active, because it causes complete confusion of the
machine.
Disable stop at sheet end - In normal operation mode, if the sheet of paper runs out of the
machine, the adhesive tape application stops.
If there is a cut-out or a dark printed pattern on the sheet to be processed, the machine can
sense it as a sheet end and stops the taping process.
If this function is active, the machine continues taping even if it detects the end of the
sheet.
Conveyor reverse direction - This function is used to change the direction of the conveyor
belt. This may be necessary for machine maintenance.
Disable of taping on a stationary conveyor belt - If you select this function, then the
taping heads are inactive if the conveyor stops.
Disable button press sound - In normal operation mode, the machine beeps when you
touch any icon. This sound can be disabled, but it will only take effect after the next
reboot.
Show test functions on the home page - If you select this option, then the following
elements appearing on the start screen:
• Simulate photosensor button. If you press this button, it has the same effect as if the
photosensor detects a paper sheet.
• 1, 2...8 Lamps indicating the state of the taping heads.
• X0, X1, X2 lamps, indicating the inputs of the controller
Display standby time - In case of inactivity after elapsing this time the light of the display
turns off.
PAPERFOX FTD-1T TOUCHSCREEN CONTROLLER 7