Paperfox FTD-1T Instruction Manual page 4

After touching the settings icon, the settings screen will appear. The operating parameters
of the machine can be set here.
An incorrect setting may cause the device to malfunction.
The setting is recommended only to those who have read this user manual.
If the setting without entering a password is not enabled, this menu item can only be
accessed by entering a password.
The password is 2142
After touching the positions icon, the adjustments screen will appear.
Here you can set the desired number and location of the adhesive tape strips for each
adhesive tape applicator head separately. The device can control up to 8 taping heads. In
the settings menu you can set the nr. of the heads available. If no head enabled in the
settings menu, then this icon is invisible.
After touching the Save icon, the load/save screen will appear.
In this menu item, you can save and load the sticking parameters of the adhesive tape.
After touching the Language icon, you can choose the language in which you want to
program the device.
After touching the Help icon, you can view the help instruction for the currently active
screen.
By touching the Conveyor on/off icon you can start or stop the conveyor belt. It is the
same function as pressing the Start pushbutton on the controller unit.
By touching the Speed icons, you can select the speed of the conveyor belt. If you select
the slowest speed, the speed can be adjusted with the potentiometer of the frequency
converter in the box of the control unit. If you change the speed, the gluing positions will
also change. This speed level is recommended when setting up and testing the machine.
The Counter shows the number of sheets passed through the machine.
The Length shows the length of the last sheet passed through the machine. Even with
accurate settings, this may differ slightly from the actual page length because the
photosensor does not detect the front and end of the page exactly the same way.
This does not affect the accuracy of the tape application, because the machine measures
each position relative to the front of the sheet.
By touching the Reset button, you can set the counter value to zero.
PAPERFOX FTD-1T TOUCHSCREEN CONTROLLER 4