Table of Contents
Advertisement
en Installation instructions
Place the detached part at the required position.
8.
Observe the entire length of the flue duct.
Drill the 8 mm diameter holes to a depth of 80 mm
9.
for the fastenings.
Remove the template.
10.
Installing the appliance bracket
Screw on the appliance bracket for the extractor
1.
hood hand-tight.
Use a spirit level to align the appliance bracket hori-
2.
zontally and screw it firmly in place.
Screw the enclosed sleeves fully into the upper ap-
3.
pliance bracket.
20
Installing the appliance
Place the mains plug on top of the appliance.
1.
Remove the grease filters.
2.
Hook the appliance into the appliance bracket from
3.
above so that it clicks firmly into place.
To align the appliance, if necessary, adjust the
4.
height of the appliance from above using a screw-
driver.
Secure the appliance from above using 2 nuts.
5.
Advertisement
Table of Contents
