Phoenix Libra 100 How To Use

How to use your
Libra 100 gas meter

Libra 100 Meter Functions

This meter is operated by a pay-as-you-go (PAYG)
card provided by your supplier. Should you require
a replacement card you can purchase one from
any retailer displaying the PayPoint sign.
Registering Your Card
1 Insert your PAYG card fully into the card
slot with the gold chip facing up.
2
Wait 30 seconds - 1 minute until the meter
beeps to confirm registration.
3 Now that the card is registered it can
be used at any PayPoint to top up.
(minimum of £5, maximum £49)
Transferring Credit To Meter
1 Insert your PAYG card fully with the gold
chip facing up.
2 The meter display will confirm the amount
of credit on the card and update the
credit total.
If you require further assistance please contact your gas supplier
Designed and distributed by Phoenix Natural Gas, 197 Airport Road West BT3 9ED
Display screen shows meter status
and remaining credit information
Function button A (red)
Function button B (black)
Card slot
Restoring Gas Supply
and Emergency Credit
If credit runs out or runs too low, the meter will
notify you by closing the gas valve and stopping
supply. If this happens the meter display will flash
between 'OFF' and '15m3'. There will also be a
'C' displayed at the bottom left hand side of the
display screen. This shows the valve is closed.
1 Before attempting to restore the gas
supply, you must switch off all appliances.
2 Insert your PAYG card fully with the gold
chip facing up.
3 Press and hold the black button B.
After approx 5 seconds 'let go' will appear
on screen.
4 Release black button B and in approx 30
seconds 'C' will be replaced with 'O' at the
bottom left of the display. The screen will
also display 'LOW'.
5 The gas valve is now open and all
appliances are safe to use.