Bosch Professional GLI 14,4 V-LI Original Instructions Manual page 19

OBJ_BUCH-808-001.book Page 19 Friday, June 27, 2008 11:23 AM
Operation
Starting Operation
Inserting the Battery
Use only original Bosch lithium ion batteries with the voltage
listed on the nameplate of your cordless worklight. Using other
batteries can lead to injuries and pose a fire hazard.
Insert the charged battery 5 from the rear into the base of the cord-
less worklight. Press the battery completely into the base until the
red stripe can no longer be seen and the battery is securely locked.
Switching On and Off
To start the cordless worklight, press the On/Off switch 2.
To switch off the cordless worklight, press the On/Off switch 2 again.
Protection Against Deep Discharging
The lithium ion battery is protected against deep discharging by the
"Electronic Cell Protection (ECP)". When the battery is empty, the
cordless worklight is switched off by means of a protective circuit.
Working Advice
Changing the Handle Position (see figure B)
The position of the handle 3 can be changed. Rotate the handle 3 un-
til it engages in one of the 4 possible positions.
Bosch Power Tools
English | 19
1 619 P01 346 | (27.6.08)