Nvidia ConnectX-4 Lx User Manual page 28


In case your machine has the latest firmware, no firmware update will occur and the
installation script will print at the end of installation a message similar to the
following:
Device #1:
----------
Device Type: ConnectX-X
Part Number: MCXXXX-XXX
PSID: MT_<version>
PCI Device Name: 0b:00.0
Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW XX.XX.XXXX
Status: Up to date

In case your machine has an unsupported network adapter device, no firmware
update will occur and one of the error messages below will be printed. Please
contact your hardware vendor for help with firmware updates.
Error message #1:
Device #1:
----------
Device Type: ConnectX-X
Part Number: MCXXXX-XXX
PSID: MT_<version>
PCI Device Name: 0b:00.0
Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW XX.XX.XXXX
Status: No matching image found
Error message #2:
The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0
(PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor.
4. Case A: If the installation script has performed a firmware update on your network adapter,
you need to either restart the driver or reboot your system before the firmware update can
take effect. Refer to the table below to find the appropriate action for your specific card.
Action \ Adapter
Standard ConnectX-4/
ConnectX-4 Lx or higher
Adapters with Multi-Host
Support
Socket Direct Cards
Case B: If the installations script has not performed a firmware upgrade on your network
adapter, restart the driver by running: "/etc/init.d/openibd restart".
Driver Restart Standard Reboot (Soft
- +
- -
- -
Cold Reboot (Hard
Reset)
-
+
+
Reset)
28