Table of Contents
Advertisement
STORAGE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
TIP
Use of fuel stabilizer and conditioner eliminates the
need to drain the fuel system. Consult a Yamaha deal-
er if the fuel system needs to be drained instead.
ENGINE PREPARATION
With the key removed and the spark plug lead discon-
nected, turn the clutch by hand until compression is
felt. This puts the valves in the closed position.
CHASSIS PREPARATION
1.
Verify the tire pressure is set to:
• Front: 137 kPa (1.37 kgf/cm
• Rear: 137 kPa (1.37 kgf/cm
2.
Clean exterior of the utility vehicle and apply a
rust inhibitor.
3.
Cover the utility vehicle with a breathable cover
and store it in a dry, well-ventilated area.
BATTERY PREPARATION
1.
Remove the battery from the utility vehicle and
store it in a cool, dry place that stays between
0˚C (32˚F) and 30˚C (90˚F).
2.
Have the battery recharged every 60–90 days to
keep it fully charged. The battery must be kept
fully charged to avoid damage.
3.
Batteries like the one supplied with your vehicle
normally do not require you to check the water
level inside the battery for the one-year warranty
period provided by the manufacturer.
NOTICE
Do not allow cleaning solution to enter battery
cells. Serious battery damage can result.
4.
Clean the top of the battery with a solution of
baking soda and water, as necessary, to remove
corrosion.
57
2
, 20 psi)
2
, 20 psi)
Advertisement
Table of Contents
