Adjust Ambilight Settings; Adjust Lightguide Brightness - Philips 32PFL7603D User Manual

5�4

Adjust Ambilight settings

1. Press MENU on the remote control
and select TV menu > TV settings >
Ambilight.
2. Press Æ to enter the list.
TV settings
Settings assistant
Reset smart settings
Picture
Sound
Ambilight
3. Press Î or ï to select one of the following
settings:
• Ambilight
Switches Ambilight On or Off.
• Brightness
Changes the light output of Ambilight.
• Mode
Choose from four Ambilight modes:
Colour, Relaxed, Moderate, Dynamic.
See Section 4.5.1 Change Ambilight mode.
• Colour
Select a pre-defined colour setting (Warm
white, Cool white, Blue) or make a
custom colour of your own.
Note
D
When making a custom colour, select
Saturation first, setting the value high.
Then select Palette and choose a value
between 0 to 100.
• Separation
Sets the level of Ambilight colour on the
left and right side of the TV. Maximum,
Medium, Minimum and Off levels are
available. When Off is selected, only mono
colour Ambilight is displayed.
• Balance
Sets the level of Ambilight on the left and
right side of the TV.
EN-22
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Caution
C
To avoid poor remote control reception, do
not place remote control sensors on your
devices in range of Ambilight.
5�4�1 Enable Ambilight when TV is in
standby mode
When the TV is in standby mode, you can
switch on Ambilight to enhance the ambience
of your room. Ambilight is only available as
constant colour in this mode.
1. Press AMBILIGHT on the remote control
when the TV is in standby.
2. Press MODE repeatedly to select an
available colour.
5�5 Adjust LightGuide
brightness
1. Press MENU on the remote control
and select TV menu > Installation >
Preferences > LightGuide Level.
2. Press Æ to enter the LightGuide Level
menu.
3. Use Î or ï to select the LightGuide
brightness:
• : Off 0
• : 25% 1
• : 50% 2
• : 75%
3
• 4: Full
4. Press OK to confirm.
5. Press MENU to exit.