Advertisement
NOTE:
Most of the listed assembly hardware has been packaged separately, but
some hardware items have been preinstalled in the identified assembly parts.
In these instances, simply remove and reinstall the hardware as assembly is
required.
Please reference the individual assembly steps and make note of all
preinstalled hardware.
Prior to assembly of this product, remove all components from the package
and verify all the listed parts are supplied. Once certain, begin with the first
assembly step.
ASSEMBLY INSTRUCTIONS
Step 1
Fix the front stabilizer (5) to the mainframe (1) with cap nut (17), spring washer
(15), curve washer (20) and square neck pan head bolt (9).
Lock the rear stabilizer (6) to the mainframe (1)with square neck pan head
bolt(10)、curve washer(20)、spring washer(15) and cap nut(17).
9
Advertisement
