Advertisement
MUSIC WITH EMOTION
CONNECTING YOUR BUSINESS TO THE TECHNOLOGY RESOURCES
YOU NEED
Note, too, that the closer you place tower speakers to any ad-
jacent walls, including the wall behind the speakers, the
greater the deep bass output will be. The farther out you move
them from nearby wall surfaces, the less bass you'll hear. Ex-
periment with the placement so bass is smooth and deep, free
from "boomy" bass effects.
QUICK-START SPEAKER SETUP
Bryston speakers arrive pre-assembled with large non-
marring adjustable feet. Optionally you may install the includ-
ed spike feet by removing the large feet using the provided
Allen wrench. Install the spike feet and tighten securely in the
inserts provided at the bottom of the speaker. Speaker level-
ing, the height of both types of feet can be adjusted by turning
the foot up or down on the thread.
The Bryston tower speakers come with 'OUTRIGGERS' which
can replace the feet if desired. We recommend the outriggers
for greater structural rigidly and decoupling.
Turn the speakers around and look at the back panel. You'll
see 3 sets of (LINKED) gold-plated 5-way binding posts, to
which you are going to connect the speaker cables from your
receiver or amplifier. Each gold binding post has a colored
ring around it -- BLACK is NEGATIVE. Most receiver and am-
plifier manufacturers use this color code and you should use
it as well - it makes things a lot easier to hook up your speaker
cables. You will also see a positive (+) sign engraved in the
plastic beneath one of the other coloured binding post, and a
negative (-) sign beneath the BLACK post. Your amplifier may
or may not have these positive and negative symbols. If you
wish, you can use these symbols along with the color coding
to guide you.
PAGE 4
Advertisement
