Advertisement
TECHNICAL DATA
MODEL
SKU
LUMENS
WATTS
BEAM ANGLE
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
INSTRUCTION MANUAL
LANDSCAPE SOFT LIGHT
OUTDOOR
VT-8055
218237,
218236,
218238
2045 Lm
2050 Lm
In Sphere
In Sphere
(360°)
(360°)
20W
110°
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
CRI
≥80
AC: 220-240V,
INPUT VOLTAGE
50/60Hz
ON/OFF CYCLE
15,000
LIFE SPAN
20,000 Hours
MATERIAL
PC
DIMENSION
319x170x114
Advertisement
Table of Contents
Related Manuals for V-TAC VT-8055
Summary of Contents for V-TAC VT-8055
- Page 1 110° INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
- Page 2 WARNING 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Page 3 INSTALLATION DIAGRAM 1. Switch off the power. 2. To drill the appropriate holes on the wall. (picture 1) 3. Enter the particles and install the lamp base on the wall. (picture 2) 4. Connect the light into the mains (220-240V, 50/60Hz), install the lampshade and cover the shell.
- Page 4 STEPS TO REMOVE THE LIGHT SOURCE FOR VERIFICATION (ONLY FOR MARKET SURVEILLANCE AUTHORITY) STEPS 1. Remove the lamp shell with your hands or a screwdriver 2. Unscrew the lamp shade with a screwdriver and take off the lamp shade 3. Unscrew the sub-tapping screws and take out the LED. Mains connection test. Note: Light Source Removal will Void the Warranty RECOMMENDATIONS ON HOW TO DISPOSE THE LIGHT SOURCE AT THE END OF ITS LIFE:...
Need help?
Do you have a question about the VT-8055 and is the answer not in the manual?
Questions and answers