Jireh MOTORIZED COUPLANT PUMP Manual

5. When motorized couplant pump use is complete, close the flow control valve
(rotate clockwise) and turn the power switch OFF.
6. Depressurize the system before transporting.
a. Ensure the pump is unplugged from a
power source and the power switch is
OFF.
b. Disconnect the irrigation kit from the
outlet.
c. Disconnect the inlet hose (Fig. 5-1) and
insert the inlet hose into the outlet
(Fig. 5-2).
d. Open the flow control valve until all the
pressure is released from the system.
Chapter 5
MAINTENANCE AND SUPPORT
1. The motorized couplant pump should be serviced by qualified personnel only.
Always disconnect the power source before servicing.
2. For technical support, contact JIREH.
Chapter 6
TROUBLESHOOTING
Problem Possible Cause
The pump does The flow control valve is not
not discharge opened, the power switch
fluid is not turned on, the power
source is disconnected, inlet/
outlet connections are not
attached, inlet filter is not
placed in a fluid.
Pump flow Hose kinked, hose split, inlet
inconsistent filter plugged.
Chapter 7
SPARE PARTS
BOM ID Part # Description
1 CMS038 Inlet Filter
2 LA021 Inlet Hose
3 LA081 Quick Connect Fitting: 7/16 in
4 CMS037 Motorized Pump Inlet Tube
4
1
- Inlet hose spare parts
Fig. 6
1
- Pump Assembly
Fig. 5
Solution
Ensure the flow control valve is rotated
counter-clockwise, the power switch is
turned on, the power cord is plugged into
a live source, inlet/outlet fittings are fully
inserted, inlet filter is submerged in the
fluid reservoir.
Ensure houses are not split or kinked, and
remove/replace the inlet filter.
3
Jireh Industries Ltd.
2
53158 Range Road 224
Ardrossan, Alberta
780.922.4534
jireh.com
2
Canada
T8E 2K4
MOTORIZED
COUPLANT
PUMP
CM0061 Rev 02.4